J5F-TX2000 6B Solid With Sound - 310-052-300-10
J5F-TX2000 6B Solid With Sound - 310-052-300-10
Sold out
Is this your key?
- Regular remote. A remote on your key ring, next to a separate key.
- 6 buttons: SOLID & Sounds
Different key? We also have for your this vehicle:
This is the only key we list for the this vehicle.
- Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
- Pre-owned: genuine and tested, in its original case with visible wear. Works the same, costs less.
Do I need to program it, and how much does that cost?
Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.
Will my old keys still work?
Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- FCC ID
- J5F-TX2000
- Buttons
- 6 (SOLID & Sounds)
- Frequency
- 372 MHz
- Transponder chip
- None (alarm remote)
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Extended warranty is available on the checkout page.
Remote with 6 Buttons Green LED with Solid Buttons and Sound
Brand: Astrostart
Condition: Used
FCC ID: J5F-TX2000
Part Numbers: 310-052-300-10
Four different remote controls can be programmed for a given vehicle. If a 5th remote is added the 1st is deleted. When the first code learned command is sent, all the old codes are cleared. Therefore, if you want to add a new remote, all the old ones must be programmed as well. A hood pin is required for the programming procedure associated with this remote.
Programming procedure:
1. Open hood.
2. Place key in ignition and turn to RUN position.
3. Apply the brake once.
4. You now have 10 seconds to turn the key from RUN to STOP position 3
times.
5. If this sequence is correctly carried out, the control module flashes
parking lights.
6. Press any button on the new remote control (except the panic button).
When access code of new remote is memorized, the control module will
respond with 1 flash of the parking lights.
7. Repeat the above procedures for each remote control that has to be
programmed, up to four remotes.
8. Apply the brake.
9. New remotes are ready and now added to the system.
Works on these aftermarket systems (Module Part Number: 392-1273-317):
Astrostart RSS-4204A, Astrostart RSS-2205A, Astrostart Series/Model 500, Astrostart Series/Model 1100, Astrostart Series/Model 2100, Astrostart Series/Model 4100, AstroStart 1105, AstroStart 1105U, AstroFlex 1105, AstroStart 1100, AstroFlex 1100, AstroFlex 2006, AstroStart 2006(A&B), AstroStart 2106XR, AstroStart 2106U, AstroStart 3106(A), AstroStart 3106(U), AstroFlex 3106M, AstroStart 4204-A.
What customers say
4.3 out of 5 from 1170 verified store reviews
-
Perfect remote. Had it programmed and everything works. I Highly recommend yall. 5 *'s on my order. Thank you.
Ridgway Lisa · Verified buyer
2020 Buick Envision Smart Key Fob -
My 2003 Thunderbird has slighlty different programing steps. Turning the key off and on quickly 8 times within 3 seconds. Then you can program several FOBs quickly.
Stanley Lech · Verified buyer
2003 Ford Thunderbird Remote FCC ID: CWTWB1U345, CWTWB1U331 -
I am on a customers 95 Corvette an it needed a new ignition lock cylinder. I was able to acquire new OEM 1995 GM keys with resistors for the vehicle. These keys were and easy solution to keep car in OEM condition.
Randy Elliott · Verified buyer
1995 Chevrolet Corvette Genuine VATS Single Sided Key