This remote has an FCC ID of H5OT52. It is commonly mispelled as H50T52. This remote transmits at 434MHz and has a remote start and a keyless entry button. This XT-12 remote was made for the Autopage C3-RS601 and C3-RS603 but it is also the manufacturer's replacement for the XT-11 which worked on RS-60, RS-600, RS-602. Our remotes are tested on keyless entry signal testers before we ship it to you. Free tech support is available to help you program the vehicle to accept the remote.

PROGRAMMING INSTRUCTIONS :

Turn the Ignition 'switch ??FF/ON??3 TIMES and stay in the

??N??position.

Within 15 seconds.

Push the Programming switch

2 times

holding in on the 2nd push, until a long chirp from the horn (optional) and the LED starts to flash then release the valet switch. You are now in the Transmitter programming mode.

Press the ??ock??button on the transmitter until a chirp from the horn / a flash from the parking light / the LED turns on for 2 seconds to confirming the first transmitter is now programmed.

Repeat step 3 to program 2nd, 3rd and 4th remotes if you have.

Exit programming mode: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.

Item		Price	Qty	Total
		Subtotal	$0.00
		Shipping
		Total

Net Orders Checkout

Shipping Address

Shipping Methods