Pursuit 145SPR Keyless Remote Transmitter ELVATNE
Pursuit 145SPR Keyless Remote Transmitter ELVATNE
Sold out
Is this your key?
- Part number 145spr. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
- 5 buttons.
Different key? We also have for your this vehicle:
This is the only key we list for the this vehicle.
- Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
- Battery CR2032, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.
Do I need to program it, and how much does that cost?
Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.
Will my old keys still work?
Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 145spr
- FCC ID
- elvatne
- Buttons
- 5
- Frequency
- 315 MHz
- RF transmission
- 1Way
- Transponder chip
- None (alarm remote)
- Battery
- CR2032
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Extended warranty is available on the checkout page.
This remote comes with easy programming instructions to make the system in your car accept this remote. Battery included. The number on the circuit board is ATNE. The FCC ID on the back of the remote is ELVATNE. The part number is 145SPR. This remote has been tested to ensure it sends proper signals. We have free tech support to help you complete the programming. This remote is classified as an Audiovox Type 19 Transmitter. This means it can be used to replace or be replaced by other Type 19's like 145SP, 5BCR14SP, 175SPR, 5BCR14RE, 5BCR17SPR. This remote was made for these Pursuit Systems: PR5B, PRO9276E, PRO9776E.
Programming Procedure:
1. Enter the vehicle and turn the ignition key to the "on" position.
2. Press valet button 3 times.
3. If installed, the dash LED will flash one time, and the siren will "chirp" one time, indicating the
system is ready to accept programming for channel 1.
4. Press button #1 on the keychain transmitter for 1-3 seconds until the siren emits a long "chirp" to
confirm that programming of channel I was successful. If your remote has one button, then skip to last step.
5. Press valet button 1 time.
6. If installed, the dash LED will flash twice, and the siren will "chirp" twice, indicating the system is ready to accept programming for channel 2.
7. Press button #2 on the keychain transmitter for 1-3 seconds until the siren emits a long "chirp" to
confirm that programming of channel I was successful. If your remote has two buttons, then skip to last step.
8. Press valet button 1 time.
9. If installed, the dash LED will flash thrice, and the siren will "chirp" thrice, indicating the system is ready to accept programming for channel 3.
10. Press button #3 on the keychain transmitter for 1-3 seconds until the siren emits a long "chirp" to confirm that programming of channel I was successful. If your remote has three buttons, then
skip to last step.
11. If installed, the dash LED will flash four times, and the siren will "chirp" four times, indicating the
system is ready to accept programming for channel 4.
12. Press button #4 on the keychain transmitter for 1-3 seconds until the siren emits a long "chirp" to confirm that programming of channel I was successful. If your remote has three buttons, then
skip to last step.
13. If the remote has 5 or more buttons, then continue the sequence described above programming the remaining buttons to the remaining channels.
14. To exit program mode, either turn the ignition key to the off position, or move the valet switch on then off one additional time. This is indicated by a long "chirp" from the siren.
Reviews of this part
5.0 out of 5 from 3 reviews
Customer Reviews
Overpriced but works fine
Pursuit 145SPR Keyless Remote Transmitter ELVATNE
Worked great. Easy program