4570A - OEM New

2004 Honda Accord Remote PN: 08E61-S5D-1M001

OEM New
$169.95
Ir directamente a la información del producto
4570A - OEM New
1/5
  • 4570A - OEM New
  • 2004 Honda Accord Regular Remote 08E61-S5D-1M001
  • 4570A
  • 4570A
  • 4570A
2004 Honda Accord Remote PN: 08E61-S5D-1M001

2004 Honda Accord Remote PN: 08E61-S5D-1M001

4.3 out of 5 · 1168 store reviews

$169.95
Envío calculado en el pago.

Price for OEM New. 3 conditions from $29.95 to $169.95: compare

In stock in New Jersey · ships with tracking

Is this your key?

  • Part number 08E61-S5D-1M001. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Regular remote. A remote on your key ring, next to a separate key.
  • 3 buttons: Lock, Unlock, Panic
Condition
Condition
  • Usually far less than the dealer charges. The price is for the part; programming is done separately.
  • Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
  • Battery CR2025, installed.
$169.95
On your registration, insurance card, or the driver-side dash. Questions? 386-586-3650
  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Look at the back of your current regular remote, or inside the battery cover. If the part number (08E61-S5D-1M001) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.

Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.

Which condition should I choose?

All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.

  • OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
  • OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
  • Aftermarket: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?

Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.

Will my old keys still work?

Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
08E61-S5D-1M001
FCC ID
NHVWB1U523
Fits
2004 Honda Accord
Buttons
3 (Lock, Unlock, Panic)
Frequency
433 MHz
RF transmission
Rolling Code (433 MHz)
Transponder chip
None (RKE only)
Battery
CR2025
Remote programming
You can do it, no tools

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part

We test the remote when it arrives at our facility, when we put it in stock, and when we put your order together.  Being tested three times means you can be relatively sure you are going to receive a remote that is sending the appropriate signals and will be accepted by the car.

Remote For Honda:

The FCC ID of the remote you will receive is NHVWB1U523. It can be used to replace the discontinued FCC ID NHVWB1U521. This remote is used on the Accord, Civic, and Element when they have the system that uses this remote.  Vehicles that use this remote are easy to program using the programming procedure included with the purchase. Also, we provide free tech support over the phone to assist you if needed. This listing is for a brand new remote - not a used one. This remote is a genuine honda remote, not a generic replacement. This remote has three buttons: LOCK, UNLOCK, and PANIC. The LOCK and UNLOCK buttons send a signal right away when you press the buttons. By design, the PANIC button must be pressed for almost 2 seconds to product a signal. If you have an old remote for your car and the FCC ID on the back of it is the same as NHVWB1U523 or NHVWB1U521 then you can be sure this remote will work for you.

Programming Procedure:

IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.

1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
2. Perform these steps within 5 seconds.

a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.

3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on the same remote again and release. The door locks will cycle to confirm that the system accepted this remote.
6. Repeat step 5 for second or third remotes.
7. Turn the key back to LOCK and remove from ignition to exit programming mode.

The following vehicles can use this remote when equipped with the factory keyless entry system:

Honda Accord (2003-2004) - DX, Honda Civic (2001), Honda Civic (2002-2005), Honda Element (2003), Honda Element (2004-2006) - DX/LX, Honda Fit (2007-2008) - Base, Honda Pilot (2003-2004) - EX.

How to program it: Programming Procedure #510
IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.

  1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
  2. Perform these steps within 5 seconds.
    1. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
    2. Press the UNLOCK button on the remote and release.
    3. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
    4. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
    5. Press the UNLOCK button on the remote and release.
    6. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
    7. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
    8. Press the UNLOCK button on the remote and release.
    9. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
  3. Within 5 seconds turn the ignition to ON.
  4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
  5. Within 10 seconds press the UNLOCK button on the same remote again and release. The door locks will cycle to confirm that the system accepted this remote.
  6. Repeat step 5 for second or third remotes.
  7. Turn the key back to LOCK and remove from ignition to exit programming mode.

What customers say

4.3 out of 5 from 1168 verified store reviews

Read all 1168 reviews on Judge.me