1999 Nissan Pathfinder Keyless Entry Remote KBRASTU10
1999 Nissan Pathfinder Keyless Entry Remote KBRASTU10
Sold out
Is this your key?
- Regular remote. A remote on your key ring, next to a separate key.
- 4 buttons: Lock, Unlock, Trunk, Panic
Different key? We also have for your 1999 Nissan Pathfinder:
This is the only key we list for the 1999 Nissan Pathfinder.
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car by a locksmith or dealer. We suggest a locksmith: usually faster and cheaper than the dealer. Find a locksmith near you
- Battery CR2025, installed.
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- A locksmith or dealer programs it to your car. There is no do-it-yourself sequence for this one: it needs a programming tool plugged into the car. An automotive locksmith usually costs less than the dealer and often comes to you. Programming isn’t included in our price, so ask for a quote first. What to say when you call: “I have a new 1999 Nissan Pathfinder Keyless Entry Remote KBRASTU10. I need it programmed to my car. How much, and when can you do it?” Find an automotive locksmith near you
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current regular remote, or inside the battery cover. If the part number or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. This one has no do-it-yourself sequence: a locksmith or dealer connects a programming tool to the car. Prices vary by area, so call one or two automotive locksmiths for a quote; they are usually cheaper than the dealer.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- FCC ID
- KBRASTU10
- Fits
- 1999 Nissan Pathfinder
- Buttons
- 4 (Lock, Unlock, Trunk, Panic)
- Frequency
- 315 mhz
- RF transmission
- 1Way
- Transponder chip
- None (RKE only)
- Blade
- High Security
- Battery
- CR2025
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Replacement 1999 Nissan Pathfinder Keyless Entry Remote Key Fob - FCC ID KBRASTU10.
This vehicle is not onboard programmable: a dealer or automotive locksmith programs the remote to the vehicle.
Available as OEM Pre-owned.
Ships from our New Jersey warehouse.
How to program it: Programming Procedure #500
- Close and lock all doors with the driver’s side power lock/unlock switch.
- Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.
- Insert key into the ignition cylinder and turn to the ACC position.
- Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
- If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).
- Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.
Troubleshooting:
- Verify the key sensor in the ignition cylinder is working by opening the driver door and inserting the key into the ignition. The chime will sound if the sensor is working properly. If the chime does not sound then you need to wiggle the key in the cylinder to see if you can place it in a position where the chime does sound. If you are able to then that is the position you must put the key in when you insert and withdraw 6 times within 10 seconds. If you can’t wiggle into a position where it works then you need to have the sensor replaced before continuing.
- Make sure the 6 times within 10 seconds requirement is met. The most common problem is doing this step too fast or too slow.
- If the hazard lights flash with the key sequence but not when the remote button is pressed make sure you are meeting the 5 second timing requirement and that you are pressing the remote button only once for 1 second.
- Try the procedure with the seat belt on/off with windows closed.
What customers say
4.3 out of 5 from 1168 verified store reviews
-
My 2003 Thunderbird has slighlty different programing steps. Turning the key off and on quickly 8 times within 3 seconds. Then you can program several FOBs quickly.
Stanley Lech · Verified buyer
2003 Ford Thunderbird Remote FCC ID: CWTWB1U345, CWTWB1U331 -
I am on a customers 95 Corvette an it needed a new ignition lock cylinder. I was able to acquire new OEM 1995 GM keys with resistors for the vehicle. These keys were and easy solution to keep car in OEM condition.
Randy Elliott · Verified buyer
1995 Chevrolet Corvette Genuine VATS Single Sided Key -
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob