Prestige 105BP Keyless Starter Remote ELVATJA
Prestige 105BP Keyless Starter Remote ELVATJA
In stock in New Jersey · ships with tracking
Is this your key?
- Part number 105bp. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
- 5 buttons: Lock, Unlock, 1, 2, trunk / key
Different key? We also have for your this vehicle:
This is the only key we list for the this vehicle.
- Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
- Battery CR2032, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- Pre-owned: genuine and tested, in its original case with visible wear. Works the same, costs less.
Do I need to program it, and how much does that cost?
Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.
Will my old keys still work?
Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 105bp
- FCC ID
- elvatja
- Buttons
- 5 (Lock, Unlock, 1, 2, trunk / key)
- Frequency
- 434 MHz
- RF transmission
- 1Way
- Transponder chip
- None (alarm remote)
- Battery
- CR2032
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
New Prestige 105BP Keyless Starter Remote ELVATJA with programming instructions and battery included free.
Works on these Audiovox / Prestige / Pursuit systems: APS25C, APS422E, APS510C, APS57C, APS57CA, APS596C, APS687C, APS787C, APS901C, APS922E, APS997C, PRO9051E, PRO9051i, PRO9056C, PRO9056i, PRO9276C, PRO9276i, PRO9276TW, PRO9556C, PRO9556CA, PRO9556i, PRO9644C, PRO9644i, RO9776C, PRO9776i, PRO9801C and PRO9801i.
PROGRAMMING PROCEDURE:
1) Enter the vehicle, and turn the ignition switch to the on position.
2) Press and release the valet push-button switch three times. NOTE: Some systems may use a combination push-button LED switch. In these systems the push-button and the dashmounted LED are one and the same.
3) The dash mounted LED will flash 1x, and the siren will chirp 1x, indicating that the system is ready to accept programming of channel #1 which is arm/lock, disarm/unlock/unlock 2, and panic functions.
4) Press and hold the lock or lock/unlock symbol button of the transmit- ter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 4 for each transmitter you wish to program". NOTE: If your transmitter button has the Lock/Unlock icon on one button, press and release the valet push button switch 2 times then move on to step #8.
5) Press and release the valet push button switch one time to advance to channel 2. The siren will chirp 2 times and the dash-mounted LED will Flash 2 times, indicating that the unit is ready to accept programming for channel # 2 which is only used for separate lock and unlock button transmitters, and is the disarm/unlock/unlock 2 and panic.
6) Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 6 for each transmitter you wish to program".
7) Press and release the valet push button switch one time to advance to channel 3. The siren will chirp 3 times and the dash-mounted LED will Flash 3 times, indicating that the unit is ready to accept programming for channel # 3 which is the trunk release/alternate output channel of the system.
8) Press and hold the trunk/key symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 8 for each transmitter you wish to program".
9) Press and release the valet push button switch one time to advance to channel 4 if so equipped. The siren will chirp 4 times and the dash mounted LED will Flash 4 times, indicating that the unit is ready to accept programming for channel # 4, optional device (where equipped) 10) Press and hold the Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 10 for each transmitter you wish to program".
11) Press and release the valet push button switch one time to advance to channel 5 if so equipped. The siren will chirp 5 times and the dash mounted LED will Flash 5 times, indicating that the unit is ready to accept programming for channel # 5 optional device (where equipped)
12) Press and hold the second Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 12 for each transmitter you wish to program".
13) Within 10 seconds, press and release the valet program switch one time. (Siren emits 6 short chirps indicating channel 6 has been entered)
14) Within 10 seconds, Press and hold the unlock button, (or any unused button(s)), of the first transmitter you wish to control Channel 6 output, (Driver Priority 1) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 6 output, Driver Priority 1)
15) Within 10 seconds, press and release the valet program switch one time. (Siren emits 7 short chirps indicating channel 7 has been entered)
16) Within 10 seconds, Press and hold the unlock button (or any unused button(s)) of the first transmitter you wish to control Channel 7 output, (Driver Priority 2) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 7 output, Driver Priority 2)
NOTE: Channels 6 and 7 can be used as a separate output to control a function other than driver priority. Simply programming any unused transmitter button other than the unlock button will allow complete independent control of these outputs.
What customers say
4.3 out of 5 from 1170 verified store reviews
-
Perfect remote. Had it programmed and everything works. I Highly recommend yall. 5 *'s on my order. Thank you.
Ridgway Lisa · Verified buyer
2020 Buick Envision Smart Key Fob -
My 2003 Thunderbird has slighlty different programing steps. Turning the key off and on quickly 8 times within 3 seconds. Then you can program several FOBs quickly.
Stanley Lech · Verified buyer
2003 Ford Thunderbird Remote FCC ID: CWTWB1U345, CWTWB1U331 -
I am on a customers 95 Corvette an it needed a new ignition lock cylinder. I was able to acquire new OEM 1995 GM keys with resistors for the vehicle. These keys were and easy solution to keep car in OEM condition.
Randy Elliott · Verified buyer
1995 Chevrolet Corvette Genuine VATS Single Sided Key