Viper 7145V EZSDEI7141 4 Button Remote for 350Plus R350 3105V 4105V 3305V
Viper 7145V EZSDEI7141 4 Button Remote for 350Plus R350 3105V 4105V 3305V
Price for Aftermarket New. 2 conditions from $14.95 to $59.95: compare
In stock in New Jersey · ships with tracking
Is this your key?
- Part number 7145v. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
- 4 buttons: Lock, Unlock, AUX, *
Different key? We also have for your this vehicle:
This is the only key we list for the this vehicle.
- Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
- Battery CR2016, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
- Pre-owned: genuine and tested, in its original case with visible wear. Works the same, costs less.
Do I need to program it, and how much does that cost?
Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.
Will my old keys still work?
Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 7145v
- FCC ID
- ezsdei7141
- Buttons
- 4 (Lock, Unlock, AUX, *)
- Frequency
- 434 MHz
- Transponder chip
- None (alarm remote)
- Battery
- CR2016
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Vipers's 7145V 4-button keyfob transmitter works with the following systems: 350Plus, R350, 3105V, 3305V, and 4105V car security systems. Its 1-way transmissions send your commands to the alarm, while its four buttons cover arming and disarming the alarm, locking and unlocking the doors, a "panic" button, and auxiliary output features that can be added (like a trunk release). The 7145V includes two CR2016 batteries and has a range of 1500 feet.
This remote is an ideal replacement for a lost remote because it includes Expert Remotes And Keys Tech Support. Simply call us when you are ready perform the programming and we will assist you.
The 7145V transmitter is equipped with 4-buttons, and features 1-way operation (transmitter-to-alarm). The buttons control the following features and functions of the security system:
LOCK: Locks the doors and arms the vehicle
UNLOCK: Unlocks the doors and disarms the vehicle
AUX: Activates Silent Mode and Auxiliary Output functions if equipped
PANIC: Activate alarm to find car or to alert people to danger
Combination: combining Lock and Unlock buttons together will control an Auxiliary Output
Batteries: The 7145V uses two CR2016 Lithium Coin-Cell 3V batteries, which can be user-replaced when they become weak. It is wise to replace batteries every 2 years to prevent remotes from being destroyed by leaking batteries.
At Remotes And Keys, you get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. We verify what is in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Programming Procedure:
Alarm must be disarmed. Valet mode won?? work. The red LED must be off. If there is no working remote and the alarm sounds when you open the door or start the vehicle then do the following:
Press valet switch for one second and release with the ignition ON. If that doesn?? work then do it with ignition OFF.
Adding a new remote for DEI system 4105V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 1 time, release it, press it again and hold it. You may hear a chirp, beep, or honk and the LED light on dash will flash once. Do not release button.
4. Within 5 seconds press the arm button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
Adding a new remote for DEI systems 350Plus, R350, 3105V, 3305V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 7 times, and hold it on the eighth. You may hear a chirp, beep, or honk and the LED light on dash will flash. Do not release valet/program switch.
4. Within 5 seconds press the LOCK button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
If you don?? know what a valet switch/button is or you can?? find
Programming Procedure:
Alarm must be disarmed. Valet mode won?? work. The red LED must be off. If there is no working remote and the alarm sounds when you open the door or start the vehicle then do the following:
Press valet switch for one second and release with the ignition ON. If that doesn?? work then do it with ignition OFF.
Adding a new remote for DEI system 4105V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 1 time, release it, press it again and hold it. You may hear a chirp, beep, or honk and the LED light on dash will flash once. Do not release button.
4. Within 5 seconds press the arm button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
Adding a new remote for DEI systems 350Plus, R350, 3105V, 3305V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 7 times, and hold it on the eighth. You may hear a chirp, beep, or honk and the LED light on dash will flash. Do not release valet/program switch.
4. Within 5 seconds press the LOCK button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
What customers say
4.3 out of 5 from 1174 verified store reviews
-
Key worked great and was easy to program. Only thing I noticed is that the key fob out shell looked very similar to the key fob in photos but it was not actual the OEM Toyota shell shown in photo. But works great no issues
Kyle · Verified buyer
2002 Toyota Tacoma Dealer Installed Remote -
Perfect remote. Had it programmed and everything works. I Highly recommend yall. 5 *'s on my order. Thank you.
Ridgway Lisa · Verified buyer
2020 Buick Envision Smart Key Fob -
My 2003 Thunderbird has slighlty different programing steps. Turning the key off and on quickly 8 times within 3 seconds. Then you can program several FOBs quickly.
Stanley Lech · Verified buyer
2003 Ford Thunderbird Remote FCC ID: CWTWB1U345, CWTWB1U331