Code Alarm CATX4 |H5OT49 | Tested, Guaranteed To Work
Code Alarm CATX4 |H5OT49 | Tested, Guaranteed To Work
In stock in New Jersey · ships with tracking
Is this your key?
- Regular remote. A remote on your key ring, next to a separate key.
- 4 buttons: Lock, Unlock, Remote Start/Trunk, Panic
Different key? We also have for your this vehicle:
This is the only key we list for the this vehicle.
- Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
- Battery CR2016, installed.
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- Pre-owned: genuine and tested, in its original case with visible wear. Works the same, costs less.
Do I need to program it, and how much does that cost?
Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.
Will my old keys still work?
Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- FCC ID
- h5ot49
- Buttons
- 4 (Lock, Unlock, Remote Start/Trunk, Panic)
- Frequency
- 434 MHz
- RF transmission
- 1Way
- Transponder chip
- None (alarm remote)
- Battery
- CR2016
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Works on: CA1050, CA1051, CA1150, CA115, CA1551, CA2051, CA5051, CA5051MT, CA5150, CA6150, CA6151, CA6550, CA6551.
Battery included.
You will need to use the valet switch (programming/override button) to perform the programming procedure. It is possible to perform programming without the valet switch but you would need to access the receiver under the dash. We have a troubleshooting procedure for how to do this that we can provide upon request.
There are 2 button styles for this remote but the two styles are the same remote. We mix them together since they are the same. Style 1 is as pictured with button 4 being remote start. Style 2 is with button 4 being trunk instead.
Programming Procedure:
1) Turn the ignition ON.
2) Press and hold the valed/override button.
3) Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button.
4) Press Button 1 of each transmitter you wish to program. The system will respond with 1 chirp for each accepted transmitter (up to 4).
5) Turn the Ignition OFF to exit programming. The system will also exit programming ater 15 seconds of inactivity.
Note: The system has 1 button programming which programs all channels of the system.
Reviews of this part
3.7 out of 5 from 3 reviews
Customer Reviews
They went above and beyond with customer service. Excellent products and fast friendly service
I took it to a shop for programming, and couldn’t be programmed… would like a refund ASAP!!!!!
Awesome service, quick delivery and worked with my old remote starter