2019 Ford Fiesta Smart Key Fob PN: 5919918, 5931704, 164-R8048, 164-R8100
2019 Ford Fiesta Smart Key Fob PN: 5919918, 5931704, 164-R8048, 164-R8100
Ships in 2–5 business days
Is this your key?
- Part number 7S7Z-15K601-H. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Smart key. Push-button start. The key stays in your pocket.
- 3 buttons: Lock, Unlock, Trunk
Different key? We also have for your :
This is the only key we list for the .
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car by a locksmith or dealer. We suggest a locksmith: usually faster and cheaper than the dealer. Find a locksmith near you
- Battery CR2032, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- A locksmith or dealer programs it to your car. There is no do-it-yourself sequence for this one: it needs a programming tool plugged into the car. An automotive locksmith usually costs less than the dealer and often comes to you. Programming isn’t included in our price, so ask for a quote first. What to say when you call: “I have a new 2019 Ford Fiesta Smart Key Fob, part number 5919918, 5931704, 164-R8048, 164-R8100. I need it programmed to my car. How much, and when can you do it?” Find an automotive locksmith near you
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current smart key, or inside the battery cover. If the part number (5919918, 5931704, 164-R8048, 164-R8100) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
- OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. This one has no do-it-yourself sequence: a locksmith or dealer connects a programming tool to the car. Prices vary by area, so call one or two automotive locksmiths for a quote; they are usually cheaper than the dealer.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 7S7Z-15K601-H, 7S7Z-15K601-L, 5919918, 164-R8048
- FCC ID
- KR55WK48801
- Buttons
- 3 (Lock, Unlock, Trunk)
- Frequency
- 434 MHz
- Transponder chip
- ID49 (128-bit)
- Blade
- High Security
- Battery
- CR2032
- Key programming
- Locksmith or dealer
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Factory Smart Key Remote with FCC ID KR55WK48801 and KR5876268. The Ford part number is 164-R8048 and 164-R8100. The Strattec part number is 5919918 and 5931704. Tested and guaranteed to work. When there aren't 2 working keys to use to initiate programming, an automotive locksmith is required for programming. If there are two keys already working with the vehicle, this can be programmed with an included easy to use customer programming procedure.
Remote For Ford:
This remote features 3 buttons: Lock, Unlock, and Panic. This remote sends it's signals on a frequency of 433Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry.
Programming Procedure:
Ensure that the vehicle is off before beginning this procedure. Ensure that all doors are closed before beginning this procedure and that all doors remain closed throughout the procedure. Perform this procedure exactly as described below, and perform all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait at least one minute before starting again. Please read and understand the entire procedure before you begin.
1. Place the new un-programmed intelligent access key in the pocket inside the center console utility compartment.
2. Press the driver or passenger power door unlock control three times.
3. Press and release the brake pedal one time.
4. Press the driver or passenger power door lock control three times.
5. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that the programming mode has been entered and two programmed intelligent access keys have been detected in the vehicle.
6. Within one minute, press the start/stop button. A message will be displayed on the message center indicating that the new Intelligent Access Key was programmed. If four intelligent access keys have already been programmed to your vehicle, you cannot program anymore and the message. MAX # OF KEYS LEARNED will be displayed on the message center.
7. Remove Intelligent Access Key from utility compartment pocket and press the unlock or lock control on the newly programmed intelligent access keys to exit programming mode.
8. Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with new Intelligent Access Key. If the Intelligent Access Key has been successfully programmed, it can be used to activate the Intelligent Access with Push Button Start feature and can be used to start your vehicle.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Ford Focus (2012-2019), Ford C-Max (2013-2018), Ford Fiesta (2011-2019).How to program it: Programming Procedure #317
ADDING SPARE INTELLIGENT ACCESS KEYS:
You must have two previously programmed intelligent access keys inside the vehicle and the new un-programmed intelligent access keys readily accessible. If two previously programmed keys are not available, you must take your vehicle to your local automotive locksmith to have the spare key(s) programmed.
Ensure that the vehicle is off before beginning this procedure. Ensure that all doors are closed before beginning this procedure and that all doors remain closed throughout the procedure. Perform this procedure exactly as described below, and perform all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait at least one minute before starting again. Please read and understand the entire procedure before you begin.
- Place the new un-programmed intelligent access key in the pocket inside the center console utility compartment.
- Press the driver or passenger power door unlock control three times.
- Press and release the brake pedal one time.
- Press the driver or passenger power door lock control three times.
- Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that the programming mode has been entered and two programmed intelligent access keys have been detected in the vehicle.
- Within one minute, press the start/stop button. A message will be displayed on the message center indicating that the new Intelligent Access Key was programmed. If four intelligent access keys have already been programmed to your vehicle, you cannot program anymore and the message. MAX # OF KEYS LEARNED will be displayed on the
- message center.
- Remove Intelligent Access Key from utility compartment pocket and press the unlock or lock control on the newly programmed intelligent access keys to exit programming mode.
- Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with new Intelligent Access Key. If the Intelligent Access Key has been successfully programmed, it can be used to activate the Intelligent Access with Push Button Start feature and can be used to start your vehicle.
What customers say
4.3 out of 5 from 1166 verified store reviews
-
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob -
works just as it should for my car
Brandon · Verified buyer
1995 Chevrolet Impala Genuine VATS Single Sided Key -
Found the fob my wife lost, now I have 3
Mike Loomis · Verified buyer
2024 Hyundai Ioniq 5 Smart Key Remote