3025A - OEM New

2013 Lincoln MKS Smart Key Fob PN: 164-R8094

OEM New
$199.95
Skip to product information
3025A - OEM New
1/6

2013 Lincoln MKS Smart Key Fob PN: 164-R8094

4.3 out of 5 · 1174 store reviews

$199.95
Shipping calculated at checkout.

Price for OEM New. 3 conditions from $29.95 to $199.95: compare

Ships in 2–5 business days

Is this your key?

  • Part number 164-R8094 (same part: 5921288, BA1T-15K601-Ax). Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Smart key. Push-button start. The key stays in your pocket.
  • 5 buttons: Lock, Unlock, Panic, Trunk, Remote Start
Condition
Condition
  • Usually far less than the dealer charges. The price is for the part; programming is done separately.
  • Must be programmed to your car by a locksmith or dealer. We suggest a locksmith: usually faster and cheaper than the dealer. Find a locksmith near you
  • Battery CR2032, installed.
$199.95
On your registration, insurance card, or the driver-side dash. Questions? 386-586-3650
  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. A locksmith or dealer programs it to your car. There is no do-it-yourself sequence for this one: it needs a programming tool plugged into the car. An automotive locksmith usually costs less than the dealer and often comes to you. Programming isn’t included in our price, so ask for a quote first. What to say when you call: “I have a new 2013 Lincoln MKS Smart Key Fob, part number 164-R8094. I need it programmed to my car. How much, and when can you do it?” Find an automotive locksmith near you
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Look at the back of your current smart key, or inside the battery cover. If the part number (164-R8094) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.

Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.

Which condition should I choose?

All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.

  • OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
  • OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
  • Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?

Yes, a new key or remote has to be programmed to your car before it works. This one has no do-it-yourself sequence: a locksmith or dealer connects a programming tool to the car. Prices vary by area, so call one or two automotive locksmiths for a quote; they are usually cheaper than the dealer.

Will my old keys still work?

Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
5921288, 164-R8094, BA1T-15K601-Ax
FCC ID
M3N5WY8609
Fits
2013 Lincoln MKS
Buttons
5 (Lock, Unlock, Panic, Trunk, Remote Start)
Frequency
315 MHz
RF transmission
Rolling Code (315 MHz ASK)
Transponder chip
ID46 (Hitag2)
Blade
High Security
Battery
CR2032
Remote programming
You can do it with 2 working keys

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part


When there aren't 2 working Smart Key Remote to use to initiate programming, an automotive locksmith is required for programming. But if you have two Smart Key Remotes that are already working with the vehicle, this can be programmed using an easy to follow customer programming procedure. However, some vehicles that use this remote would require a locksmith.


Remote For Lincoln:

Factory Keyless Entry Smart Key transmitter with FCC ID M3N5WY8609. 4 more key fobs have the same fcc id.

Rotunda Part Number: 164-R8094

Lincoln Part Number: BA1T-15K601-AX.

The Strattec part number is 5921288.

Condition: OEM New

This is a 1Way remote which sends it's signals on a frequency of 315 MHz. This remote has 5 buttons, tested and guaranteed to work.


Programming Procedure:

You must have two previously programmed intelligent access keys inside the vehicle and the new un-programmed intelligent access keys readily accessible. You must take your new un-programmed intelligent access key if two previously programmed remotes are not available. Ensure that the vehicle is OFF, all doors are closed and all doors remain closed throughout the procedure. Perform the steps exactly described below and within 30 seconds of starting sequence. If any steps are performed out of sequence, stop and wait at least one minute before doing it again.

Please read and understand the entire procedure before you begin.

1. Place the new un-programmed intelligent access key in the pocket inside the center console utility compartment.
2. Press the driver or passenger power door unlock control three times.
3. Press and release the brake pedal one time.
4. Press the driver or passenger power door lock control three times.
5. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indication that the programming mode has been successfully activated and two previously programmed remotes have been detected in the vehicle.
6. Within one minute, press the start/stop button. A message will be displayed on the message center indicating that the new Intelligent Access Key was programmed.
7. Remove the Intelligent Access Key from utility compartment pocket and press the unlock or lock control on the newly programmed intelligent access keys to exit programming mode.
8. Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with new Intelligent Access Key.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Lincoln Navigator (2015-2017), Lincoln MKS (2013-2016), Lincoln MKT (2013-2019), Lincoln MKX (2011-2015).

How to program it: Programming Procedure #PF6

Programming Procedure:

You can program a maximum for four intelligent access keys to your vehicle. You must have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. See a qualified locksmith to have the spare key programmed if two previously programmed keys are not available. Make sure that your vehicle is off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you perform any steps out of sequence.

  • Read and understand the entire procedure before you begin:

1. Place the first programmed key in the backup slot (A) in the center console, then press the push button ignition switch. Insert the first previously programmed coded key into the ignition.
2. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Remove the intelligent access key. Switch the ignition off and remove the first coded key from the ignition.
4. Within 10 seconds, place a second programmed intelligent access key in the backup slot. Press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Remove the intelligent access key. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. Place the unprogrammed intelligent access key in the backup slot and press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. Programming is now complete. Verify the remote-control functions operate and your vehicle starts with the new intelligent access key. If programming was not successful, wait 10 seconds and repeat Steps 1 through 7.

What customers say

4.3 out of 5 from 1174 verified store reviews

Read all 1174 reviews on Judge.me
  • Key worked great and was easy to program. Only thing I noticed is that the key fob out shell looked very similar to the key fob in photos but it was not actual the OEM Toyota shell shown in photo. But works great no issues

    Kyle · Verified buyer

    2002 Toyota Tacoma Dealer Installed Remote
  • Perfect remote. Had it programmed and everything works. I Highly recommend yall. 5 *'s on my order. Thank you.

    Ridgway Lisa · Verified buyer

    2020 Buick Envision Smart Key Fob
  • My 2003 Thunderbird has slighlty different programing steps. Turning the key off and on quickly 8 times within 3 seconds. Then you can program several FOBs quickly.

    Stanley Lech · Verified buyer

    2003 Ford Thunderbird Remote FCC ID: CWTWB1U345, CWTWB1U331