1995 Nissan Pathfinder Pathfinder Remote FCC: G57NTX318 PN: 999U7-6D001 - Remotes And Keys

1995 Nissan Pathfinder Remote FCC: G57NTX318 PN: 999U7-6D001

Replacement New
$29.95
Skip to product information
1995 Nissan Pathfinder Pathfinder Remote FCC: G57NTX318 PN: 999U7-6D001 - Remotes And Keys

1995 Nissan Pathfinder Remote FCC: G57NTX318 PN: 999U7-6D001

4.3 out of 5 · 1178 store reviews

$29.95
Shipping calculated at checkout.

Sold out

Is this your key?

  • Part number 999U7-6D001. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Regular remote. A remote on your key ring, next to a separate key.
  • 2 buttons: Lock, Unlock
ConditionReplacement New
  • Usually far less than the dealer charges. The price is for the part; programming is done separately.
  • Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
  • Battery A23, installed.
$29.95
On your registration, insurance card, or the driver-side dash. Questions? 386-586-3650
  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Look at the back of your current regular remote, or inside the battery cover. If the part number (999U7-6D001) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.

Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.

Do I need to program it, and how much does that cost?

Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.

Will my old keys still work?

Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
999U7-6D001
FCC ID
G57NTX318
Fits
1995 Nissan Pathfinder
Buttons
2 (Lock, Unlock)
Frequency
318 MHz
RF transmission
Rolling Code (318 MHz ASK)
Transponder chip
None (RKE only)
Battery
A23
Remote programming
You can do it, no tools

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part

Extended warranty is available on the checkout page.


All vehicles using this remote are onboard programmable. Remote comes with easy programming instructions so you can program your vehicle to accept new remotes. Battery is included. If you have trouble with the programming we have free tech support.


Remote For Nissan:

FCC ID is G57NTX318

Part Number: 999U7-6D001

It has 2 buttons: Lock/Unlock, and Panic. This remote transmits at 318 MHz. We test the remote before sending it to you to be sure it is sending proper signals.  Nissan has discontinued this part.


Programming Procedure:

1. Locate the electronic module. (It is located under the driver?? seat.)
2. Under the center of the Nissan label on the top of the module there is a 7/8" hole. Rub your finger over the label to locate the hole and punch through the label with your finger or a dull object such as a pencil eraser. Inside the hole is a square yellow button. This is the programming button.
3. Cycle the ignition key to ON then back to OFF. Press and hold the programming button. The siren will emit four single introduction tones followed by a five tone burst. Release the programming button. The siren will now emit single prompting tones at one second intervals. Each prompting tone is an opportunity to program a remote. After any prompting tone press the large (arm/disarm) button of a remote. The siren will immediately emit a confirmation tone. Wait for another prompting tone and press the large button of another remote. Repeat until all transmitters to be used with the vehicle have been learned.
4. Turn the ignition key ON then OFF to exit programming mode.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Nissan Pathfinder (1993-1995).
How to program it: Programming Procedure #502
  1. Locate the electronic module. (It is located under the driver’s seat.)
  2. Under the center of the Nissan label on the top of the module there is a 7/8" hole. Rub your finger over the label to locate the hole and punch through the label with your finger or a dull object such as a pencil eraser. Inside the hole is a square yellow button. This is the programming button.
  3. Cycle the ignition key to ON then back to OFF. Press and hold the programming button. The siren will emit four single introduction tones followed by a five tone burst. Release the programming button. The siren will now emit single prompting tones at one second intervals. Each prompting tone is an opportunity to program a remote. After any prompting tone press the large (arm/disarm) button of a remote. The siren will immediately emit a confirmation tone. Wait for another prompting tone and press the large button of another remote. Repeat until all transmitters to be used with the vehicle have been learned.
  4. Turn the ignition key ON then OFF to exit programming mode.

What customers say

4.3 out of 5 from 1178 verified store reviews

Read all 1178 reviews on Judge.me