1994 Honda Passport Passport Dealer Installed Security Remote G57ITX318 - Remotes And Keys

1994 Honda Passport Dealer Installed Security Remote G57ITX318

Replacement New
$29.95
Skip to product information
1994 Honda Passport Passport Dealer Installed Security Remote G57ITX318 - Remotes And Keys
  • 1994 Honda Passport Passport Dealer Installed Security Remote G57ITX318 - Remotes And Keys
1994 Honda Passport Dealer Installed Security Remote G57ITX318

1994 Honda Passport Dealer Installed Security Remote G57ITX318

4.3 out of 5 · 1175 store reviews

$29.95
Shipping calculated at checkout.

Sold out

Is this your key?

  • Part number 2-91309-401-0. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Regular remote. A remote on your key ring, next to a separate key.
  • 4 buttons: Lock, Unlock, Panic, Hatch
ConditionReplacement New
  • Usually far less than the dealer charges. The price is for the part; programming is done separately.
  • Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
  • Battery CR2016, installed.
$29.95
On your registration, insurance card, or the driver-side dash. Questions? 386-586-3650
  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Look at the back of your current regular remote, or inside the battery cover. If the part number or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.

Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.

Do I need to program it, and how much does that cost?

Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.

Will my old keys still work?

Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
2-91309-401-0
FCC ID
G57ITX318
Fits
1994 Honda Passport
Buttons
4 (Lock, Unlock, Panic, Hatch)
Frequency
315 MHz
RF transmission
Rolling Code (315 MHz ASK)
Transponder chip
None (RKE only)
Battery
CR2016
Remote programming
You can do it, no tools

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part

We sell a replacement remote which looks different but works the same.  The remote comes with a battery and programming instructions.  Free tech support is included for programming help.

Remote For Honda:

This is the remote for 1994-1995 Honda Passport when equipped with the Dealership installed system.  The original remote says FCC ID G57ITX318 and the honda part number was 2-91309-401-0.

Programming Procedure:

1. Locate the security system control unit under the driver's seat.
2. Rub your finger over the label on the top of the control unit until you find the depression. Once you find it, push your finger through the label to expose the hole underneath. Inside the hole is a square, yellow button, this is the programming button.
3. Turn the ignition switch to ON, then turn it to LOCK.
4. Press and hold the programming button. Check that the security siren emits four separate chirps followed by a five-chirp burst. This confirms that the system is in programming mode.The siren then emits prompting chirps at 3-second intervals.
5. Release the programming button.
6. After a prompting chirp, press the "LOCK" button on the transmitter. Verify that the siren emits a confirmation chirp to confirm that the transmitter's code was accepted by the control unit. If you wait more than 30 seconds between programminf transmitters, the siren emits three chirps and the system exits the programming mode.
7. To program additional tranmitters, wait for another prompting chirp, then press the "LOCK" button. (You can program up to four transmitter per vehicle.)
8. To exit the programming mode, turn the ignation switch to ON, then turn it to LOCK.

The following vehicles can use this remote when equipped with the factory keyless entry system:

Honda Passport (1994-1995).

How to program it: Programming Procedure #517

NOTES:

  • The system uses a stacking-type memory that accepts up to four transmitters. If you program a fifth transmitter, the memory for the first transmitter is pushed out, and it will no longer work.
  • To clear a lost or stolen transmitter from the system's memory, program a transmitter four times. This will remove the missing transmitter from memory, since only four transmitters can be accepted.
  1. Locate the security system control unit under the driver's seat
  2. Rub your finger over the label on the top of the control unit until you find the depression. Once you find it, push your finger through the label to expose the hole underneath. Inside the hole is a square, yellow button; this is the programming button.
  3. Turn the ignition switch to ON, then turn it to LOCK.
  4. Press and hold the programming button. Check that the security siren emits four separate chirps followed by a five-chirp burst. This confirms that the system is in programming mode. The siren then emits prompting chirps at 3-second intervals.
  5. Release the programming button.
  6. After a prompting chirp, press the "LOCK" button on the transmitter. Verify that the siren emits a confirmation chirp to confirm that the transmitter's code was accepted by the control unit. If you wait more than 30 seconds after the prompting chirp before programming a transmitter, or wait more than 30 seconds between programming transmitters, the siren emits three chirps and the system exits the programming mode.
  7. To program additional transmitters, wait for another prompting chirp, then press the "LOCK" button. (You can program up to four transmitters per vehicle.)
  8. To exit the programming mode, turn the ignition switch to ON, then turn it to LOCK.

 

What customers say

4.3 out of 5 from 1175 verified store reviews

Read all 1175 reviews on Judge.me