1993 Mercury Cougar Regular Remote 3165189 F5DZ-15K601-B - OEM Refurbished

1993 Mercury Cougar Remote PN: F5DZ-15K601-B

OEM Refurbished
$39.95
Skip to product information
1993 Mercury Cougar Regular Remote 3165189 F5DZ-15K601-B - OEM Refurbished
1/5

1993 Mercury Cougar Remote PN: F5DZ-15K601-B

4.3 out of 5 · 1175 store reviews

$39.95
Shipping calculated at checkout.

In stock in New Jersey · ships with tracking

Is this your key?

  • Part number F5DZ-15K601-B (same part: 3165189). Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Regular remote. A remote on your key ring, next to a separate key.
  • 4 buttons: Lock, Unlock, Trunk, Light
Condition
Condition
  • Usually far less than the dealer charges. The price is for the part; programming is done separately.
  • Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
  • Battery CR2016, installed.
$39.95
On your registration, insurance card, or the driver-side dash. Questions? 386-586-3650
  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Look at the back of your current regular remote, or inside the battery cover. If the part number (F5DZ-15K601-B) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.

Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.

Which condition should I choose?

All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.

  • OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
  • OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
Do I need to program it, and how much does that cost?

Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.

Will my old keys still work?

Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
3165189, F5DZ-15K601-B
FCC ID
GQ43VT4T
Fits
1993 Mercury Cougar
Buttons
4 (Lock, Unlock, Trunk, Light)
Frequency
315 MHz
RF transmission
Rolling Code (315 MHz ASK)
Transponder chip
None (RKE only)
Battery
CR2016
Remote programming
You can do it, no tools

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part


 All automobiles that use this remote are onboard programmable. This indicates that you can program the car to accept new remotes yourself without using special tools or having special knowledge. Free phone tech support is available if you need it.


 Remote For Ford Mercury Lincoln:

This remote features 4 buttons: Lock, Unlock, Trunk, and Panic. This remote sends it's signals on a frequency of 315Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry. This is a replacement for the factory keyless entry remote on many Ford, Mercury, and Lincoln vehicles. This remote replaces the following FCC ID: GQ43VT4T. There ford part number is F5DZ-15K601-B. The remote is tested before shipping to make sure you are sent a remote that is sending the correct signals and has proper strength.


Programming Procedure:

Note: The programming connector is located behind/under the glove compartment (attached to the relay mounting panel or taped to the wire assembly) and is accessed by dropping the glove compartment. It's a white or light gray plastic connector with two terminals that is not plugged into anything. The color of the two wires leading to the plastic connector is grey/yellow and white/yellow.
1. Put the ignition to ON or ACC and momentarily jump the two program connector terminals with a suitable jumper wire. The system will respond by locking and then unlocking all doors or chirping the horn. After that, remove the jumper wire.
2. Press any button on the first remote. All doors will lock and unlock or horn will chirp to verify programming of that remote.
3. Press any button on each additional remotes (including your old ones) allowing a pause for the door locks to cycle after each remote. The keyless entry system will allow up to four remotes to be programmed.
4. Turn the ignition to OFF. All doors will lock then unlock or the horn will chirp.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Mercury Tracer (1997-1998), Ford Contour (1995-2000), Ford Crown Victoria (1993-1994), Ford Escort, (1997-1998), Ford Mustang (1994-1998), Ford Probe (1993-1997), Ford Taurus (1993-1997), Ford Thunderbird (1993-1997), Lincoln Continental (1993-1994), Lincoln Mark VIII (1993-1996), Lincoln Town Car (1993-1994), Mercury Cougar (1993-1997), Mercury Grand Marquis (1993-1994), Mercury Mystique (1995-2000), Mercury Sable (1993-1997), Mercury Tracer (1997-1998), Ford Crown Victoria (1993-1994), Ford Escort (1997-1998), Ford Mustang (1994-1998), Ford Probe (1993-1997), Ford Taurus (1993-1997), Ford Thunderbird (1993-1997), Lincoln Continental (1993-1994), Lincoln Mark VIII (1993-1996), Lincoln Town Car (1993-1994), Mercury Cougar (1993-1997), Mercury Grand Marquis (1993-1994), Mercury Mystique (1995-2000), Mercury Sable (1993-1997).

How to program it: Programming Procedure #312
NOTE: The program connector is located in the trunk, behind the rear left hand side access panel, taped to the wiring harness between the left tail light and the rear left wheel well. It is a plastic connector that is NOT plugged into anything.

  1. Put the ignition switch in “RUN” or “ACC” and momentarily jumper the two program connecter terminals with a suitable jumper wire. The system will respond by locking and unlocking all of the doors.
  2. Press any button on the transmitter. All doors will lock and then unlock to verify transmitter signal acceptance.
  3. Repeat step 2 for each transmitter (including your old ones) in order to program the remote keyless entry module to accept up to four transmitter signals.
  4. Turn the ignition switch to “OFF”. All of the doors will then lock and unlock.

What customers say

4.3 out of 5 from 1175 verified store reviews

Read all 1175 reviews on Judge.me