Autopage XT-33 Replacement Transmitter FCC ID: H50T21

Autopage XT-33 Replacement Transmitter FCC ID: H50T21

New
$69.95
Ir directamente a la información del producto
Autopage XT-33 Replacement Transmitter FCC ID: H50T21
1/2
  • Autopage XT-33 Replacement Transmitter FCC ID: H50T21
  • Autopage XT-33 New
Autopage XT-33 Replacement Transmitter FCC ID: H50T21

Autopage XT-33 Replacement Transmitter FCC ID: H50T21

4.3 out of 5 · 1166 store reviews

$69.95
Envío calculado en el pago.

Is this your key?

  • Part number xt-33. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Regular remote. A remote on your key ring, next to a separate key.
ConditionNew
  • Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
$69.95

Sold out

  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.

Do I need to program it, and how much does that cost?

Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.

Will my old keys still work?

Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders placed by 3 pm ET on a business day ship the same day from New Jersey, with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
xt-33
FCC ID
h50t21
Frequency
434-mhz
RF transmission
1Way
Remote programming
You can do it, no tools

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part

This remote has an FCC ID of H50T21.  It is commonly mispelled as H5OT21.  This remote transmits at 434MHz and has a remote start and a keyless entry button.  This XT-33 remote was made for the Autopage RF-215, RF-220, RF-315, RF-420, RS725LCD, RS727LCD, RS-660, RS-662, and RS-622.  XT-33 can be used to replace XT-42LCD, XT-59, XT-60, XT-61, XT-62, XT-65S, and XT-72S.  Those remotes worked on:  RS-622, RF-420LCD, RF-305, RF-310, RF-405, RF-410, RS-650Plus, RS-610Plus, RF-1050KE, RF-1055KE, RF-105KE, RS-727LCD, RS-662. Our remotes are tested on keyless entry signal testers before we ship it to you.  Free tech support is available to help you program the vehicle to accept the remote.


PROGRAMMING INSTRUCTIONS :


  1. Turn the Ignition 'switch ??FF/ON??3 TIMES and stay in the
    2. ??N??position. Within 15 seconds.
  2. Push the Programming switch
    3. 2 times holding in on the 2nd push, until a long chirp from the horn (optional) and the LED starts to flash then release the valet switch. You are now in the Transmitter programming mode.
  3. Press the ??ock??button on the transmitter until a chirp from the horn / a flash from the parking light / the LED turns on for 2 seconds to confirming the first transmitter is now programmed.
  4. Repeat step 3 to program 2nd, 3rd and 4th remotes if you have.
  5. Exit programming mode: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.

Popular product questions:

Questions: Autopage XT-33 remote start has lost its programming when new keys were programmed for the passive anti-theft system on the truck. Remote Start cranks but doesn?? turn over.

Answers: Most likely, the transponder key in the bypass module has been erased.  Put one of the newly programmed keys inside it and remote start should work.

Questions: Once my XT 33 auto start is activated how long does it stay on? Is there an auto shut off

Answers: The system owner?? manual tells you how to adjust the run timer.

Questions: Will the  Autopage XT-33 be compatible with a XT-72LCD?

Answers: If your old remote is a XT-72LCD and the system in your car is RS-725LCD or RS-727LCD then the XT-33 will work.  The XT-72LCD can also work on RS-720 and RS-520 which the XT-33 doesn?? work with.

What customers say

4.3 out of 5 from 1166 verified store reviews

Read all 1166 reviews on Judge.me