Viper 7145V EZSDEI7141 4 Button Remote for 350Plus R350 3105V 4105V 3305V

Vipers's 7145V 4-button keyfob transmitter works with the following systems: 350Plus, R350, 3105V, 3305V, and 4105V car security systems. Its 1-way transmissions send your commands to the alarm, while its four buttons cover arming and disarming the alarm, locking and unlocking the doors, a "panic" button, and auxiliary output features that can be added (like a trunk release). The 7145V includes two CR2016 batteries and has a range of 1500 feet.

This remote is an ideal replacement for a lost remote because it includes Expert Remotes And Keys Tech Support.  Simply call us when you are ready perform the programming and we will assist you.

The 7145V transmitter is equipped with 4-buttons, and features 1-way operation (transmitter-to-alarm). The buttons control the following features and functions of the security system:

LOCK: Locks the doors and arms the vehicle
UNLOCK: Unlocks the doors and disarms the vehicle
AUX: Activates Silent Mode and Auxiliary Output functions if equipped
PANIC: Activate alarm to find car or to alert people to danger
Combination: combining Lock and Unlock buttons together will control an Auxiliary Output
Batteries: The 7145V uses two CR2016 Lithium Coin-Cell 3V batteries, which can be user-replaced when they become weak.  It is wise to replace batteries every 2 years to prevent remotes from being destroyed by leaking batteries.

At Remotes And Keys, you get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. We verify what is in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Programming Procedure:
Alarm must be disarmed. Valet mode won?? work. The red LED must be off. If there is no working remote and the alarm sounds when you open the door or start the vehicle then do the following:
Press valet switch for one second and release with the ignition ON. If that doesn?? work then do it with ignition OFF.
Adding a new remote for DEI system 4105V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 1 time, release it, press it again and hold it. You may hear a chirp, beep, or honk and the LED light on dash will flash once. Do not release button.
4. Within 5 seconds press the arm button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
Adding a new remote for DEI systems 350Plus, R350, 3105V, 3305V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 7 times, and hold it on the eighth. You may hear a chirp, beep, or honk and the LED light on dash will flash. Do not release valet/program switch.
4. Within 5 seconds press the LOCK button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
If you don?? know what a valet switch/button is or you can?? find
Programming Procedure:
Alarm must be disarmed. Valet mode won?? work. The red LED must be off. If there is no working remote and the alarm sounds when you open the door or start the vehicle then do the following:
Press valet switch for one second and release with the ignition ON. If that doesn?? work then do it with ignition OFF.
Adding a new remote for DEI system 4105V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 1 time, release it, press it again and hold it. You may hear a chirp, beep, or honk and the LED light on dash will flash once. Do not release button.
4. Within 5 seconds press the arm button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.
Adding a new remote for DEI systems 350Plus, R350, 3105V, 3305V:
1. Open driver door until the remote is programmed.
2. Turn the ignition to ON.
3. Within 5 seconds of step 2 press the valet/program switch 7 times, and hold it on the eighth. You may hear a chirp, beep, or honk and the LED light on dash will flash. Do not release valet/program switch.
4. Within 5 seconds press the LOCK button on the remote transmitter. You may hear chirp, beep, or honk.
5. Release the valet/programming switch.
6. Turn ignition to OFF.