KARR Alarm Replacement Remote ELVAT5H
KARR Alarm Replacement Remote ELVAT5H
Sold out
Is this your key?
- Regular remote. A remote on your key ring, next to a separate key.
- 3 buttons: Lock/Unlock, Panic, Trunk
Different key? We also have for your this vehicle:
This is the only key we list for the this vehicle.
- Pairs with your alarm or remote-start system, not with the car. Match the FCC ID or system model on your old remote; not sure? Ask us.
- Battery A23, installed.
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You pair it with your alarm system. It programs to the alarm or remote-start unit in your car, not to the car itself. Most learn in a few minutes with the alarm’s valet or program button; the steps come in the box. An installer can also do it.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Match the FCC ID on the back of your old remote, or the model of your alarm system (on the alarm’s control unit or in its manual), to the one in the specifications on this page. These fit the alarm, not the car, so a VIN can’t tell. Not sure? Send us a photo of your old remote.
Do I need to program it, and how much does that cost?
Yes, to your alarm system. Most alarm remotes learn with the alarm’s valet or program button in a few minutes, no tools, no cost; the steps come in the box. If your system needs it, an installer can program it.
Will my old keys still work?
Program all your remotes in the same session. Most alarm systems forget any remote that isn’t programmed along with the new one.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- FCC ID
- elvat5h
- Buttons
- 3 (Lock/Unlock, Panic, Trunk)
- Frequency
- 301 MHz
- RF transmission
- 1Way
- Transponder chip
- None (alarm remote)
- Battery
- A23
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
KARR is a popular brand with a very small product line. This 3 button remote is from their most popular system, the KARR 2040a.
That system is usually found in cars that originated in the West Coast of the US. Many dealerships, especially Toyota dealers used this system as an up-sell for adding either alarm, keyless entry, or both to the vehicle.
Most users only use the center Arm/Disarm button. Some people's cars have been wired to operate trunk or panic or both.
If you lost your remote or if it stopped working, you can order a replacement remote here. The original KARR ELVAT5H remote has been discontinued but clone replacement remotes with longer warranties are available for less than the originals used to cost.
This remote is easy to program. Programming instructions are included. Free phone and email tech support available with purchase. The original remote has an FCC ID of ELVAT5H on it. It has 3 buttons. Arm/Disarm, Trunk, and Panic. There is a red LED light on the original remote. This remote's codes travel on a frequency of 303 Mhz.
Karr made this remote to work with the Karr 2020, 2020a, 2040, and 2040a systems. That means if your vehicle uses this remote there is a box wired in under your dash that says one of those model numbers. Though the original remote has been discontinued by the manufacturer, we still sell the replacement shown. It programs in using the same instructions as the original, which are included.
Programming Procedure:
1. Enter the vehicle and turn the ignition to ON.
2. Move the valet/ bypass switch ON - OFF 3 times. The LED will flash once, and the siren or horn will chirp once.
3. Hold down the center transmitter button for three seconds. This will program button one.
4. If you need to program a second channel then flip the valet / bypass switch ON-OFF. The LED will flash twice and the siren or horn will chirp twice.
5. Hold down button #2 for three seconds.
6. Turn vehicle OFF.
Reviews of this part
4.6 out of 5 from 76 reviews
LIFESAVER, finding the ELVAT5H for my Dodge Ram 3500, with dealer installed KARR.
I’ve been extremely pleased over the replacement remote I received from you folks a short time back. Very easy to program took about two minutes. Works perfectly every time. I did change it from the double horn beep each time it’s used to the silent operation, which is nice. Couldn’t be more pleased. It’s nice to have a remote again and not have to use the key each time. Thanks for the great service and the great remote.
Good
Cannot program the remote need to return
Great Price and better than the original, in distance and durability.