2016 Chevrolet Cruze Smart Key Remote FCC: HYQ4EA PN: 13529662 13508769 13584497
Price for OEM New. 3 conditions from $34.95 to $129.95: compare
Ships in 2–5 business days
Is this your key?
- Part number 13529662 (same part: 13508769, 13584497). Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Smart key. Push-button start. The key stays in your pocket.
- 5 buttons: Lock, Unlock, Remote Start, Trunk, Panic
Different key? We also have for your 2016 Chevrolet Cruze:
This is the only key we list for the 2016 Chevrolet Cruze.
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
- Battery CR2032, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current smart key, or inside the battery cover. If the part number (13529662 13508769 13584497) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
- OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 13529662, 13508769, 13584497
- FCC ID
- HYQ4EA
- Fits
- 2016 Chevrolet Cruze
- Buttons
- 5 (Lock, Unlock, Remote Start, Trunk, Panic)
- Frequency
- 434 MHz
- RF transmission
- Rolling Code (434 MHz)
- Transponder chip
- ID46 (Hitag2)
- Blade
- High Security
- Battery
- CR2032
- Key programming
- You can do it with 2 working keys
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
FCC ID: HYQ4EA
Replaces Part Numbers: 13529662, 13508769, 13584497
Brand: Avicero
Condition: Brand New Aftermarket (No Logo)
This remote features 5 buttons: Lock, Unlock, Remote Start, Trunk and Panic. This remote sends it's signals on a frequency of 315Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry.
Programming with Recognized Transmitter(s):
Programming procedure for Chevrolet Camaro, Chevrolet Cruze:
A new transmitter can be programmed to the vehicle when there are one or two recognized transmitters. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.
1.1. Place the recognized transmitter(s) in the rear cupholder in the center console (Chevrolet Camaro 2016) or the front cupholder (Chevrolet Cruze 2016).
1.2. Place two recognized transmitters in the rear cupholder (Chevrolet Camaro 2017-2021; Chevrolet Cruze 2018, manual transmission) or the front cupholder (Chevrolet Cruze 2017-2019.)
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the new transmitter into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4 or 5, 6,7, or 8
3. Replace the recognized transmitter with a new transmitter. Place the new transmitter in the rear cupholder in the center console.
4. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
5. Remove the transmitter from the transmitter pocket and press Lock or Unlock. To program additional transmitters, repeat Steps 3-5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
6. Put the key back into the transmitter.
Programming procedure for Chevrolet Malibu:
A new transmitter can be programmed to the vehicle when there are one or two recognized transmitters. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.
1.1. Place the recognized transmitter(s) (Chevrolet Malibu 2016) or two recognized transmitters (Chevrolet Malibu 2017) in the transmitter pocket with the buttons facing the rear of the vehicle. The transmitter pocket is inside the center console storage area.
1.2. Place the two recognized transmitters in the cupholder (Chevrolet Malibu 2018-2021).
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the new transmitter into the key lock cylinder on the outside of the driver door and turn the key counterclockwise five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4 or 5.
3. Place the first new transmitter into the transmitter pocket with the buttons facing the rear of the vehicle.
4. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
5. Remove the transmitter from the transmitter pocket and press Lock or Unlock. To program additional transmitters, repeat Steps 3-5 for each new transmitter. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
6. Put the key back into the transmitter
Programming without Recognized Transmitter(s) for Chevrolet Camaro, Chevrolet Cruze and Chevrolet Malibu:
If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. The vehicle must be off and all of the transmitters to be programmed must be with you.
1. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. The remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
4. Place the new transmitter into the rear cupholder in the center console (Chevrolet Camaro; Chevrolet Cruze) or into the transmitter pocket with the buttons facing toward the rear of the vehicle (Chevrolet Malibu).
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
6. Remove the transmitter from the cupholder/transmitter pocket and press Lock or Unlock. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
7. Put the key back into the transmitter.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Chevrolet Camaro (2016-2021), Chevrolet Malibu (2016-2021), Chevrolet Cruze 2016 -2019.
What customers say
4.3 out of 5 from 1178 verified store reviews
-
This fob is OEM new, and when I got it programmed and cut, it worked like a fob that came with the car! Love it and so very happy with my purchase!! Highly recommended!!😊
Terri K Crain · Verified buyer
2025 Toyota RAV4 Smart Key Remote -
Only had to order one time! Which is GOOD.
Anonymous · Verified buyer
Remotes And Keys -
Easy to program with the supplied instructions.
Mark Haymes · Verified buyer
2010 Cadillac SRX Smart Key FCC ID: NBG009768T