2010 Cadillac CTS Smart Key Fob Driver 2 PN: 25943677
2010 Cadillac CTS Smart Key Fob Driver 2 PN: 25943677
Is this your key?
- Part number 25943677. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Smart key. Push-button start. The key stays in your pocket.
- Driver 2 key (recalls driver 2’s seat and mirrors). OEM New is made for driver 2 only. Refurbished and Aftermarket work as driver 1 or 2: the programming sets it, whatever the case says.
Different key? We also have for your :
This is the only key we list for the .
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car by a locksmith or dealer. We suggest a locksmith: usually faster and cheaper than the dealer. Find a locksmith near you
Add to your order
In stock in New Jersey · ships same day by 3 pm ET
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- A locksmith or dealer programs it to your car. There is no do-it-yourself sequence for this one: it needs a programming tool plugged into the car. An automotive locksmith usually costs less than the dealer and often comes to you. Programming isn’t included in our price, so ask for a quote first. What to say when you call: “I have a new 2010 Cadillac CTS Smart Key Fob Driver 2, part number 25943677. I need it programmed to my car. How much, and when can you do it?” Find an automotive locksmith near you
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current smart key, or inside the battery cover. If the part number (25943677) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
- OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. This one has no do-it-yourself sequence: a locksmith or dealer connects a programming tool to the car. Prices vary by area, so call one or two automotive locksmiths for a quote; they are usually cheaper than the dealer.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders placed by 3 pm ET on a business day ship the same day from New Jersey, with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 25943677, 25854936
- FCC ID
- M3N5WY7777A
- Buttons
- Lock, Unlock, Remote Start, Trunk, Panic
- Frequency
- 315 Mhz
- Transponder chip
- PHILIPS ID 46
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
FCC ID: M3N5WY7777A
Cadillac Part Number: 25943677
Brand: Cadillac
Condition: OEM New
Memory: Driver 2
This remote features 4 buttons: Lock, Unlock, Starter, Panic, Trunk. This remote sends it's signals on a frequency of 315 Mhz. This remote will work for your vehicle if your vehicle is equipped with factory smart keyless entry.
Programming Procedure:
Since your vehicle is not onboard programmable or you need key cutting, you will need a dealer or automotive locksmith to program the vehicle to accept the replacement remote or key or to cut a key. Please use an automotive locksmith rather than the dealer. You are likely to get a better service for a more reasonable price.
Locksmiths make their prices based on their local market as well as the cost of the equipment used for you cutting or programming. Locksmith equipment for key cutting and vehicle programming is very expensive and most of the charge is to compensate them for their initial equipment investment.
An automotive locksmith will program your new remotes or keys by hooking up an expensive scan tool to your vehicle computer and making the vehicle learn the new remotes or keys.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Cadillac STS (2008-2011)
Cadillac CTS (2008-2015)
How to program it: Programming Procedure #167
Programming Transmitters to the Vehicle
Only keyless access transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer.
The vehicle can be reprogrammed so that lost or stolen transmitters no longer work. Each vehicle can have up to four transmitters matched to it.
Programming with a Recognized Transmitter
A new transmitter can be programmed to the vehicle when there is one recognized transmitter. For vehicles sold in Canada, two recognized transmitters are required to program a new transmitter.
- The vehicle must be off.
- Place the recognized transmitter(s) in the cupholder. Have the new transmitter available with you.
- Insert the vehicle key into the key lock cylinder located on the outside of the driver door.
- Turn the key to the unlock position five times within five seconds.
- The Driver Information Center (DIC) displays Ready To Learn Electronic Key #2, 3 or 4.
- Place the new transmitter into the transmitter pocket with the buttons facing the front of the vehicle. The transmitter pocket is inside the center console storage area located the driver and front passenger seats.
- A beep sounds once the transmitter is programmed. The DIC displays Ready To Learn Electronic Key #3 or 4, or Maximum # Electronic Keys Learned.
- Press the ignition control knob to exit programming mode.
- Remove the transmitter from the transmitter pocket and press
on the keyless access transmitter two times. - To program additional transmitters, repeat Steps 6 through 9.
Programming without a Recognized Transmitter
United States owners are permitted to program a new transmitter to their vehicle when a recognized transmitter is not available. The Canadian immobilizer standard requires that Canadian owners see their dealer for programming new transmitters when two recognized transmitters are not available.
The procedure requires three, ten minute cycles to complete the matching process.
- The vehicle must be off.
- Place the new transmitter into the transmitter pocket with the buttons facing the front of the vehicle. The transmitter pocket is inside the center console storage area located between the driver and front passenger seats.
- Insert the vehicle key into the key lock cylinder located on the driver door.
- Turn the key to the unlock position five times within five seconds.
- The DIC displays Press Start Control To Learn Keys.
- Press the ignition switch in.
- The DIC reads Leam Delay Active Wait XX Min and counts down to zero.
- The DIC displays Press Start Control To Learn Keys again.
- Press the ignition switch in again.
- Repeat Steps 7, 8 and 9.
- The DIC reads Learn Delay Active Wait XX Min and counts down to zero.
- A beep sounds and the DIC reads Ready To Learn Electronic Key # X. All previously known transmitter programming has been erased.
What customers say
4.3 out of 5 from 1165 verified store reviews
-
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob -
works just as it should for my car
Brandon · Verified buyer
1995 Chevrolet Impala Genuine VATS Single Sided Key -
Found the fob my wife lost, now I have 3
Mike Loomis · Verified buyer
2024 Hyundai Ioniq 5 Smart Key Remote