HYQ12BAN HYQ12BBX 3 Button Fob1

2007 Toyota FJ Cruiser Remote HYQ12BAN HYQ12BBX 89742-42120 3 Button

OEM New
$124.95
Ir directamente a la información del producto
HYQ12BAN HYQ12BBX 3 Button Fob1
1/5

2007 Toyota FJ Cruiser Remote HYQ12BAN HYQ12BBX 89742-42120 3 Button

4.3 out of 5 · 1178 store reviews

$124.95
Envío calculado en el pago.

Price for OEM New. 3 conditions from $24.95 to $124.95: compare

In stock in New Jersey · ships with tracking

Is this your key?

  • Part number 89742-20200 (same part: 89742-0C020, 89742-42120). Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
  • Regular remote. A remote on your key ring, next to a separate key.
  • 3 buttons: Lock, Unlock, Panic
Condition
Condition
  • Usually far less than the dealer charges. The price is for the part; programming is done separately.
  • Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
  • Battery CR2016, installed.
$124.95
On your registration, insurance card, or the driver-side dash. Questions? 386-586-3650
  • One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
  • 30-day returns. Return policy
  • Ships from our New Jersey warehouse with tracking. Shipping options

What happens after you order

  1. We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
  2. Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
  3. Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.

Questions before you buy

How do I know this fits my car?

Look at the back of your current regular remote, or inside the battery cover. If the part number or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.

Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.

Which condition should I choose?

All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.

  • OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
  • OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
  • Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?

Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.

Will my old keys still work?

Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.

What if it doesn’t work with my car?

Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.

How fast will I get it?

In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.

Specifications

Part number
89742-20200, 89742-0C020, 89742-42120
FCC ID
HYQ12BAN, HYQ12BBX
Fits
2007 Toyota FJ Cruiser
Buttons
3 (Lock, Unlock, Panic)
Frequency
315 MHz
RF transmission
Rolling Code (315 MHz ASK)
Transponder chip
None (RKE only)
Battery
CR2016
Remote programming
You can do it, no tools

The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.

About this part

All vehicles that use this remote are onboard programmable, meaning you can program the vehicle to accept new remotes yourself without any special tools or knowledge. Free phone tech support is available if needed.


Remote For Toyota:

This is a replacement for Toyota Part Numbers 89742-20200, 89742-0C020, 89742-42120 and FCC ID HYQ12BAN or HYQ12BBX with 3 buttons. Remote is tested on a keyless entry tester for radio signal strength, battery strength, and proper functioning before shipping to you.  This works on: 2004-2005 Toyota Celica, 2004-2005 Toyota Echo, 2007-2008 FJ Cruiser, 2001-2007 Toyota Highlander, 2001-2003 Toyota Prius, 2001-2003 Toyota RAV-4 (Factory installed system), 2004-2005 Toyota Rav-4, 2004-2005 Toyota Tundra, 2006 Toyota Tundra (Double Cab and Single Cab).


Programming Procedure:

1. Start with the following conditions:
a. Key is out of the ignition
b. Driver door is open (all other doors are closed)
c. Driver door is unlocked (other doors don?? matter).

2. Perform the next two steps within 5 seconds:
a. Insert the key into the ignition (don?? turn it) and pull it out.
b. Insert the key into the ignition (don?? turn it) and pull it out.

3. Perform these steps within 40 seconds:
a. Close then open the driver?? door.
b. Close then open the driver?? door.
c. Insert the key into the ignition (don?? turn it) and pull it out.

4. Perform these steps within 40 seconds:
a. Close then open the driver?? door.
b. Close then open the driver?? door.
c. Insert the key into the ignition.
d. Close the driver?? door.
e. Turn the ignition to ON (as far as you can go without cranking your engine) then back to OFF.
f. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds:
a. Press the lock and unlock buttons on the transmitter simultaneously for 1 second.
b. Immediately after releasing the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b for this remote as it has not been accepted.
c. Repeat steps A and B for each new remote.

7. Open driver?? door.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Toyota Celica (2004-2005), Toyota Echo (2004-2005), Toyota FJ Cruiser (2007-2008), Toyota Highlander (2001-2007), Toyota Prius (2001-2003), Toyota RAV4 (2001-2003), Toyota RAV4 (2004-2005), Toyota Tundra (2004-2005), Toyota Tundra (2006).

 

How to program it: Programming Procedure #610
  1. Start with the following conditions:
    1. Key is out of the ignition
    2. Driver door is open (all other doors are closed)
    3. Driver door is unlocked (other doors don’t matter).
  2. Perform the next two steps within 5 seconds:
    1. Insert the key into the ignition (don’t turn it) and pull it out.
    2. Insert the key into the ignition (don’t turn it) and pull it out.
  3. Perform these steps within 40 seconds:
    1. Close then open the driver’s door.
    2. Close then open the driver’s door.
    3. Insert the key into the ignition (don’t turn it) and pull it out.
  4. Perform these steps within 40 seconds:
    1. Close then open the driver’s door.
    2. Close then open the driver’s door.
    3. Close the driver’s door.
    4. Insert the key into the ignition.
    5. Turn the ignition to ON (as far as you can go without cranking your engine) then back to OFF.
    6. Remove the key from the ignition.
  5. Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.
  6. Perform these steps within 40 seconds:
    1. Press the lock and unlock buttons on the transmitter simultaneously for 1 second and release.
    2. Immediately after releasing the lock and unlock buttons, press the lock button by itself and release. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b for this remote as it has not been accepted.
  7. Open driver’s door.

What customers say

4.3 out of 5 from 1178 verified store reviews

Read all 1178 reviews on Judge.me