Descripción
Factory keyless entry remote for 95-99 Nissan Maxima and 96-99 Infiniti I30 has an FCC ID of A269ZUA078. It is a 434 MHz remote with 4 buttons. Nissan's part number is 28268-40U20 and Infiniti's part number is 28268-40U15. The two part numbers are the identical remote except for the name of the car brand molded into the bottom of the front of the remote. The internals and the signals the remotes send are the same, so they care compatible to replace each other.
The vehicles that use this remote is onboard programmable. This means that you can easily program your vehicle to accept new remotes yourself using the included instructions. We provide free phone tech support if you need any help. We test the remote -before we send it to you- to ensure that it is functioning properly.
This will work on your vehicle if it is equipped with factory keyless entry. I30 has factory keyless entry as a standard option. Maxima GLE, the highest trim, has factory keyless entry as a standard option. Maxima SE, the middle trim level, can have it or not, but it has it the majority of times. GXE, the lowest trim, can have it but usually does not. If you have SE or GXE you can call your local Nissan dealer parts counter, give your VIN, and ask if the vehicle is equipped with factory keyless entry. Or maybe easier, check our blog for the keyless entry verification procedure.
Programming Procedure:
Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.
1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
2. Perform these steps within 5 seconds.
a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on the same remote again and release. The door locks will cycle to confirm that the system accepted this remote.
6. Repeat step 5 for second or third remotes.
7. Turn the key back to LOCK and remove from ignition to exit programming mode.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Infiniti I30 (1996-1999) and Nissan Maxima (1995-1999).