1997 Chevrolet Venture Remote PN: 10245951 FCC ID: ABO0204T
1997 Chevrolet Venture Remote PN: 10245951 FCC ID: ABO0204T
Is this your key?
- Part number 10245951. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
Different key? We also have for your :
This is the only key we list for the .
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
Add to your order
In stock in New Jersey · ships same day by 3 pm ET
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey shelf with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey shelf, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current regular remote, or inside the battery cover. If the part number (10245951 FCC ID: ABO0204T) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders placed by 3 pm ET on a business day ship the same day from New Jersey, with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 10245951
- FCC ID
- ABO0204T
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
FCC ID: ABO0204T
Part Number: 10245951
Brand: GM
Condition: OEM New
It operates at 315Mhz and is compatible with 1997-2000 Venture, Slihouette, and Montana equipped with keyless entry and power sliding door but not equipped with alarm. The remote comes with instructions and free tech support. The remote is tested on a keyless entry tester before shipping to you.
Programming Procedure:
1. Remove the ignition key from the ignition lock cylinder.
2. Remove the ??CM PRGRM??fuse from the fuse panel, accessed by opening the
front passenger door. Use the legend on the fuse panel to properly locate the
??CMPRGRM??fuse.
3. Close all of the doors.
4. Close the liftgate.
5. Insert keys into the ignition, and turn the ignition lock cylinder to ACC (one click
towards you - the opposite direction from starting the engine).
6. Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second.
7. Open and close any vehicle door. A chime will be heard when the system enters the
programming mode.
8. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14
seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming
successful synchronization. It is necessary to wait approximately 14 seconds for a
second chime that will confirm successful programming. Your new remote has
been accepted and all existing remote codes have been erased.
9. Repeat the previous step on each additional transmitter to be programmed
(including any existing transmitters).
10. Remove the ignition key from the ignition lock cylinder.
11. Install the ??CM PRGRM??fuse back into the fuse panel.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Chevrolet Venture (1997-2001)
Pontiac Trans Sport (1997-1998)
Oldsmobile Silhouette (1997-2001)
Pontiac Montana (1999-2001)
How to program it: Programming Procedure #255
- Remove the ignition key from the ignition lock cylinder.
- Remove the “BCM PRGRM” fuse from the fuse panel, accessed by opening the front passenger door. Use the legend on the fuse panel to properly locate the “BCMPRGRM” fuse.
- Close all of the doors.
- Close the liftgate.
- Insert keys into the ignition, and turn the ignition lock cylinder to ACC (one click towards you – the opposite direction from starting the engine).
- Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second.
- Open and close any vehicle door. A chime will be heard when the system enters the programming mode.
- Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming. Your new remote has been accepted and all existing remote codes have been erased.
- Repeat the previous step on each additional transmitter to be programmed (including any existing transmitters).
- Remove the ignition key from the ignition lock cylinder.
- Install the “BCM PRGRM” fuse back into the fuse panel.
What customers say
4.3 out of 5 from 1165 verified store reviews
-
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob -
works just as it should for my car
Brandon · Verified buyer
1995 Chevrolet Impala Genuine VATS Single Sided Key -
Found the fob my wife lost, now I have 3
Mike Loomis · Verified buyer
2024 Hyundai Ioniq 5 Smart Key Remote