1994 Jeep Cherokee Factory Keyless Infrared Remote 2 Button
1994 Jeep Cherokee Factory Keyless Infrared Remote 2 Button
In stock in New Jersey · ships with tracking
Is this your key?
- Part number 56009031. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
- 2 buttons: Lock, Unlock
Different key? We also have for your 1994 Jeep Cherokee:
This is the only key we list for the 1994 Jeep Cherokee.
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
- Battery CR1616, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current regular remote, or inside the battery cover. If the part number or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 56009031
- FCC ID
- N, A
- Fits
- 1994 Jeep Cherokee
- Buttons
- 2 (Lock, Unlock)
- RF transmission
- Infrared (IR)
- Transponder chip
- None (RKE only)
- Battery
- CR1616
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
You can program the vehicle to accept new remotes yourself with the programming instructions. We test the remote on an IR tester before sending it to you.
Remote for Jeep:
This is a very hard to find remote. Unlike most car remotes, this works by transmitting Infrared signals instead of radio signals. Vehicles equipped with the system that uses this remote will have a small black dome on the roof liner above the center console. That is the receiver. If you don't have the dome then you don't have the system that uses this remote.
Programming Procedure:
1. Open the driver鈥檚 door of the vehicle. Leave it open through the programming procedure.
2. Move the driver鈥檚 door mechanical door lock lever - not the power lock switch - to the lock position.
3. Insert the ignition key and turn it to the RUN position (as far as it goes without cranking the engine.)
4. Within 20 seconds, aim a remote at the receiver dome and press the LOCK button for at least 5 seconds. Once the receiver accepts the programming code the driver鈥檚 door will unlock.
5. Once the first remote has been programmed, additional remotes up to four may be programmed. Within 20 seconds of the previous remote programming, move the mechanical door lock lever to the LOCK position. Aim the next remote at the receiver dome and press LOCK for at least 5 seconds. The door lock will cycle again.
6. The ignition must be turned off and back on within 20 seconds of the last remote for all programming to be saved. At that time all previously programmed remotes will be unprogrammed if you didn鈥檛 program them just before.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Jeep Cherokee (1993-1996), Jeep Grand Cherokee (1993-1995).How to program it: Programming Procedure #412
- Open the driver’s door of the vehicle. Leave it open through the programming procedure.
- Move the driver’s door mechanical door lock lever – not the power lock switch – to the lock position.
- Insert the ignition key and turn it to the RUN position (as far as it goes without cranking the engine.)
- Within 20 seconds, aim a remote at the receiver dome and press the LOCK button for at least 5 seconds. Once the receiver accepts the programming code the driver’s door will unlock.
- Once the first remote has been programmed, additional remotes up to four may be programmed. Within 20 seconds of the previous remote programming, move the mechanical door lock lever to the LOCK position. Aim the next remote at the receiver dome and press LOCK for at least 5 seconds. The door lock will cycle again.
- The ignition must be turned off and back on within 20 seconds of the last remote for all programming to be saved. At that time all previously programmed remotes will be unprogrammed if you didn’t program them just before.
What customers say
4.3 out of 5 from 1175 verified store reviews
-
Easy to program with the supplied instructions.
Mark Haymes · Verified buyer
2010 Cadillac SRX Smart Key FCC ID: NBG009768T -
Key worked great and was easy to program. Only thing I noticed is that the key fob out shell looked very similar to the key fob in photos but it was not actual the OEM Toyota shell shown in photo. But works great no issues
Kyle · Verified buyer
2002 Toyota Tacoma Dealer Installed Remote -
Perfect remote. Had it programmed and everything works. I Highly recommend yall. 5 *'s on my order. Thank you.
Ridgway Lisa · Verified buyer
2020 Buick Envision Smart Key Fob