Important Note:

Please note that aftermarket remote controls are not universally compatible. They are designed for specific aftermarket systems.

If you're here without checking your existing remote's FCC ID/Part Number or your system model under the dash, please contact us at:

+1-386-586-3650

Astrostart 310-052-384-00, J5F-TX1000 - Remote Start

SKU: Z7010B-RS

Condition: Pre-owned
Price:
Sale price$39.95

Shipping calculated at checkout

Stock:
In stock

Description

This Astrostart remote control for cars is guaranteed to work with your system if you have the Astrostart Model 803 system installed in your car. This remote has an FCC ID of J5F-TX1000 TYPE 1 and the part number 310-052-384-00. It has a red LED that lights up when buttons are pressed. The remote is tested on a Keyless Entry Tester before shipping to ensure it is sending the correct codes, proper signal strength, and battery strength.


 

Four different remote controls can be programmed for a given vehicle. If a 5th remote is added the 1st is deleted. When the first code learned command is sent, all the old codes are cleared. Therefore, if you want to add a Refurbished remote, all the old ones must be programmed as well.

Programming procedure:
1. Open hood.
2. Place key in ignition and turn to RUN position.
3. Apply the brake once.
4. You now have 10 seconds to turn the key from RUN to STOP position 3
times.
5. If this sequence is correctly carried out, the control module flashes
parking lights.
6. Press any button on the Refurbished remote control (except the panic button).
When access code of Refurbished remote is memorized, the control module will
respond with 1 flash of the parking lights.
7. Repeat the above procedures for each remote control that has to be
programmed, up to four remotes.
8. Apply the brake.
9. Refurbished remotes are ready and now added to the system.

Estimate shipping

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)