2016 Cadillac SRX Smart Key Fob PN: 13598528
2016 Cadillac SRX Smart Key Fob PN: 13598528
Is this your key?
- Part number 13598528. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Smart key. Push-button start. The key stays in your pocket.
Different key? We also have for your :
This is the only key we list for the .
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
- Battery CR2032, installed.
Add to your order
Ships in 2–5 business days
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current smart key, or inside the battery cover. If the part number (13598528) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
- OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders placed by 3 pm ET on a business day ship the same day from New Jersey, with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 13598528, 13580800, 13580798
- FCC ID
- HYQ2AB
- Buttons
- 5 (Lock, Unlock, Panic, Remote Start, Hatch)
- Frequency
- 315 MHz
- RF transmission
- Rolling Code (315 MHz ASK)
- Transponder chip
- ID46 (Hitag2)
- Blade
- High Security
- Battery
- CR2032
- Remote programming
- You can do it with 1 working key
- Key programming
- You can do it with 1 working key
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
This remote features 5 buttons Lock, Unlock, Remote Starter, Panic and Hatch Opener, tested and guaranteed to work.
FCC ID: HYQ2AB
Replaces Part Number: 13598528
Brand: Avicero
Condition: Brand New Aftermarket (No Logo)
Programming without a Recognized Transmitter:
If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. The vehicle must be off and all of the transmitters you wish to program must be with you.
1. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds.
The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press the ENGINE START/STOP button.
The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps.
The DIC display should now snow READY FOR REMOTE #1
4. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
5. Press the ENGINE START/STOP button. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
6. Remove the transmitter from the transmitter pocket and press the transmitter UNLOCK or LOCK9//9 button.
To program additional transmitters, repeat steps 4-6.
When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode.
Programming with a Recognized Transmitter:
To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.
1. Place the recognized transmitter(s) in the cupholder.
2. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the UNLOCK position five times within 10 seconds.
The Driver Information Center (DIC) displays READY FOR REMOTE #2, #3, #4, etc.
3. Place the transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket
4. Press the ENGINE START/STOP button. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
5. Remove the transmitter from the transmitter pocket and press the transmitter UNLOCK or LOCK button.
To program additional transmitters, repeat Steps 3-5 Each vehicle can have up to eight transmitters
matched to it.
When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode.
Works on:
Cadillac SRX (2015-2016)
How to program it: Programming Procedure #177
A new transmitter can be programmed to the vehicle when there are two recognized transmitters. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.
- Place the two recognized transmitters in the cupholder.
- Insert the vehicle key of the new transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The DIC displays READY FOR REMOTE #2, 3, 4, or 5.
- Remove the two recognized transmitters from the cupholder.
- Place the new transmitter in the cupholder.
- Press ENGINE START/STOP. When the transmitter is learned, the DIC will display that it is ready to program the next transmitter.
- Remove the transmitter from the transmitter pocket and press the transmitter Lock button. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 10 seconds to exit programming mode.
Programming without Recognized Transmitters
If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the transmitters to be programmed must be with you.
- Insert the vehicle key of the transmitter into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The DIC displays REMOTE LEARN PENDING, PLEASE WAIT
- Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. The DIC will again show REMOTE LEARN PENDING, PLEASE WAIT.
- Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
- Place the new transmitter in the front cupholder.
- Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
- Remove the transmitter from the cupholder and press Lock. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 10 seconds to exit programming mode.
What customers say
4.3 out of 5 from 1165 verified store reviews
-
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob -
works just as it should for my car
Brandon · Verified buyer
1995 Chevrolet Impala Genuine VATS Single Sided Key -
Found the fob my wife lost, now I have 3
Mike Loomis · Verified buyer
2024 Hyundai Ioniq 5 Smart Key Remote