2008 Honda Pilot Remote Head Key PN: 35111-S9V-325

SKU: 4690A-OEM

Condition: OEM New
Price:
Sale price$119.95

Shipping calculated at checkout

Stock:
Ships in 3-5 days

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
C
Cesarano
Worked but sent 4 button instead of 3 button version

Received a 4 button remote/key instead of the 3 button. The receipt and packing slip stated the 3 button. I only needed the remote electronics from inside the key. Good news is it worked after I disassembled the key and use scissors to cut off the trunk button.

Description

Extended warranty available on the checkout page.


Part Number: 35111-S9V-325
FCC ID: CWTWB1U545
Condition: Brand New Avicero

You will need key cutting and programming the transponder to your vehicle. You can find an automotive locksmith using this website: autolocksmithfinder.com

IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.
1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
2. Perform these steps within 5 seconds.
a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on the same remote again and release. The door locks will cycle to confirm that the system accepted this remote.
6. Repeat step 5 for second or third remotes.
7. Turn the key back to LOCK and remove from ignition to exit programming mode.


Works on:
Honda Pilot (2005-2008).

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
C
Cesarano
Worked but sent 4 button instead of 3 button version

Received a 4 button remote/key instead of the 3 button. The receipt and packing slip stated the 3 button. I only needed the remote electronics from inside the key. Good news is it worked after I disassembled the key and use scissors to cut off the trunk button.