2007 Toyota Sequoia Remote FCC: HYQ12BAN, HYQ12BBX PN: 89742-35050
2007 Toyota Sequoia Remote FCC: HYQ12BAN, HYQ12BBX PN: 89742-35050
Is this your key?
- Part number 89742-0C010. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
- 4 buttons: Lock, Unlock, Rear Glass, Panic
Different key? We also have for your :
This is the only key we list for the .
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- You can program it yourself at the car, no tools. Step-by-step instructions come in the box.
- Battery CR2016, installed.
Add to your order
Ships in 2–5 business days
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- You program it yourself, at the car. No tools and no appointment: the steps come in the box and are on this page under “How to program it”. It usually takes a few minutes. Have every key you want to keep working with you.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current regular remote, or inside the battery cover. If the part number (89742-35050) or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Which condition should I choose?
All conditions do the same job in your car: same buttons, programmed the same way. The difference is how it looks and what it costs.
- OEM New: a genuine factory part from the car maker, never used. The same as the dealer’s, usually for less.
- OEM Refurbished: genuine part, restored and tested by a locksmith, with a new battery. Works and programs just like OEM new. Comes in a logo case when we have one, otherwise a new case without the logo.
- Aftermarket New: a new copy built to the same spec, without the car maker’s logo. The lowest price.
Do I need to program it, and how much does that cost?
Yes, and you do it yourself at the car in a few minutes: a short sequence of key turns and button presses, no tool. The steps come in the box. No cost.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders placed by 3 pm ET on a business day ship the same day from New Jersey, with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 89742-0C010, 89742-35040, 89742-35050, 89742-0C030
- FCC ID
- HYQ12BAN, HYQ12BBX
- Buttons
- 4 (Lock, Unlock, Rear Glass, Panic)
- Frequency
- 315 mhz
- RF transmission
- Rolling Code (315 MHz ASK)
- Transponder chip
- None (RKE only)
- Battery
- CR2016
- Remote programming
- You can do it, no tools
- Interchangeable part numbers
- 89742-0C010, 89742-35040, 89742-0C030, 89742-35021
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Originally Toyota made this remote with an FCC ID of HYQ1512Y and a part number of 89742-35021. Toyota discontinued that version and superceded with these numbers: 89742-0C010, 89742-35040, 89742-0C030. Toyota seems to have settled on this current part number 89742-35050 and FCC ID HYQ12BBX. Remote is tested on a keyless entry tester for radio signal strength, battery strength, and proper functioning before shipping to you. This is a 315MHz remote which features LOCK, UNLOCK REARGLASS, and PANIC buttons.
PROGRAMMING INSTRUCTIONS (03-09 4Runner:)
1. Start with the following conditions:
a. Key is out of the ignition
b. Driver door is open (all other doors are closed)
c. Driver door is unlocked (other doors don?? matter).
2. Perform the next two steps within 5 seconds:
a. Insert the key into the ignition (don?? turn it) and pull it out.
b. Insert the key into the ignition (don?? turn it) and pull it out.
3. Perform these steps within 40 seconds:
a. Close then open the driver?? door.
b. Close then open the driver?? door.
c. Insert the key into the ignition (don?? turn it) and pull it out.
4. Perform these steps within 40 seconds:
a. Close then open the driver?? door.
b. Close then open the driver?? door.
c. Insert the key into the ignition.
d. Close the driver?? door.
e. Turn the ignition to ON (as far as you can go without cranking your engine) then back to OFF.
f. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds:
a. Press the lock and unlock buttons on the transmitter simultaneously for 1 second.
b. Immediately after releasing the lock and unlock buttons, press the unlock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b for this remote as it has not been accepted.
7. Open driver?? door.
PROGRAMMING INSTRUCTIONS (02 4Runner:)
1. Start with the following conditions:
a. Key is out of the ignition
b. Driver door is open (all other doors are closed)
c. Driver door is unlocked (other door locks don?? matter).
2. Insert the key into the ignition (don?? turn it) and pull it out.
3. Perform these steps within 40 seconds:
a. Using the power lock/unlock switch on the driver?? door, perform 5 lock/unlock cycles starting with lock. A lock/unlock cycle consists of pressing the power lock switch, followed by pressing the power unlock switch on the driver?? door panel. Use an even pace and try to go relatively fast.
b. Close, then open the driver?? door.
4. Perform these steps within 40 seconds:
a. Using the power lock/unlock switch on the driver?? door, perform 5 lock/unlock cycles starting with lock (just as you did previously).
b. Insert Key in ignition.
c. Turn the ignition to ON (as far as you can go without cranking your engine), then back to OFF.
d. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds:
a. Press the LOCK and UNLOCK buttons on the first transmitter simultaneously for 1 second and release.
b. Immediately after letting go of the LOCK and UNLOCK buttons, press the LOCK button by itself and release. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks don?? cycle, or cycle twice, repeat steps 6a and 6b as the remote has not been accepted.
c. Repeat steps 6a and 6b for each transmitter that will operate the vehicle, including any old transmitters.
7. Close driver door.
PROGRAMMING INSTRUCTIONS (99-01 4Runner, 01-03 Sequoia:)
1. Start with the following conditions:
a. Key is out of the ignition
b. Driver door is open (all other doors are closed)
c. Driver door is unlocked (other door locks don?? matter).
2. Insert the key into the ignition (don?? turn it) and pull it out.
3. Perform these steps within 40 seconds:
a. Using the power lock/unlock switch on the driver?? door, perform 5 lock/unlock cycles starting with lock. A lock/unlock cycle consists of pressing the power lock switch, followed by pressing the power unlock switch on the driver?? door panel. Use an even pace and try to go relatively fast.
b. Close, then open the drivers door.
4. Perform these steps within 40 seconds:
a. Using the power lock/unlock switch on the driver?? door, perform 5 lock/unlock cycles starting with lock (just as you did previously).
b. Turn the ignition to ON (as far as you can go without cranking your engine), then back to OFF.
c. Turn the ignition to ON (as far as you can go without cranking your engine), then back to OFF.
d. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds:
a. Press the LOCK and UNLOCK buttons on the first transmitter simultaneously for 1 second and release.
b. Immediately after letting go of the LOCK and UNLOCK buttons, press the LOCK button by itself and release. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks don?? cycle, or cycle twice, repeat steps 6a and 6b as the remote has not been accepted.
c. Repeat steps 6a and 6b for each transmitter that will operate the vehicle, including any old transmitters.
7. Close driver door.
PROGRAMMING INSTRUCTIONS (04-07 Sequoia:)
1. Start with the following conditions:
a. Key is out of the ignition
b. Driver door is OPEN (all other doors are closed).
c. Driver door is unlocked.
2. Insert the key into the ignition (don?? turn it) and pull it out.
3. Perform these steps within 40 seconds:
a. Using the power lock/unlock switch on the driver?? door, perform 5 lock/unlock cycles starting with lock. A lock/unlock cycle consists of pressing the power lock switch, followed by pressing the power unlock switch on the driver?? door panel. Use an even pace and try to go relatively fast.
b. Close then open the driver?? door.
4. Perform these steps within 40 seconds:
a. Perform 5 lock/unlock cycles again with the switch on the driver?? door starting with lock.
b. Insert the key in the ignition cylinder.
c. Turn the ignition to ON (as far as you can go without cranking your engine) then back to OFF.
d. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds:
a. Press the LOCK and UNLOCK buttons on the transmitter simultaneously for 1 second and release.
b. Immediately after letting go of the lock and unlock buttons, press the UNLOCK button by itself and release. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks cycle twice (two lock and unlock cycles), this means your remote has not been accepted. Repeat steps 6a and 6b until the door locks cycle only once.
c. Repeat steps 6a and 6b for each remote including old ones.
7. Close the driver?? door.
Replacement 2007 Toyota Sequoia Keyless Entry Remote Key Fob - part number 89742-35050, FCC ID HYQ12BAN.
Onboard programmable: step-by-step instructions are included with the remote.
Available as OEM New, OEM Refurbished and Aftermarket New.
Also fits: Toyota 4RUNNER 1999-2009.
Ships from our New Jersey warehouse.
How to program it: Programming Procedure #613
- Start with the following conditions:
- Key is out of the ignition
- Driver door is OPEN (all other doors are closed).
- Driver door is unlocked.
- Insert the key into the ignition (don’t turn it) and pull it out.
- Perform these steps within 40 seconds:
- Using the power lock/unlock switch on the driver’s door, perform 5 lock/unlock cycles starting with lock. A lock/unlock cycle consists of pressing the power lock switch, followed by pressing the power unlock switch on the driver’s door panel. Use an even pace and try to go relatively fast.
- Close then open the driver’s door.
- Perform these steps within 40 seconds:
- Perform 5 lock/unlock cycles again with the switch on the driver’s door starting with lock.
- Insert the key in the ignition cylinder.
- Turn the ignition to ON (as far as you can go without cranking your engine) then back to OFF.
- Remove the key from the ignition.
- Within 3 seconds, the power door locks should cycle (lock then unlock) automatically indicating successful entry into programming mode. Return to Step 1 if the locks do not cycle at this point.
- Perform these steps within 40 seconds:
- Press the LOCK and UNLOCK buttons on the transmitter simultaneously for 1 second and release.
- Immediately after letting go of the lock and unlock buttons, press the UNLOCK button by itself and release. Within 3 seconds, the door locks should cycle (lock then unlock) once indicating successful programming. If the door locks cycle twice (two lock and unlock cycles), this means your remote has not been accepted. Repeat steps 6a and 6b until the door locks cycle only once.
- Repeat steps 6a and 6b for each remote including old ones.
- Close the driver’s door.
What customers say
4.3 out of 5 from 1165 verified store reviews
-
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob -
works just as it should for my car
Brandon · Verified buyer
1995 Chevrolet Impala Genuine VATS Single Sided Key -
Found the fob my wife lost, now I have 3
Mike Loomis · Verified buyer
2024 Hyundai Ioniq 5 Smart Key Remote