1996 Nissan Altima Remote KM0CA78720T 999M2-F001S
1996 Nissan Altima Remote KM0CA78720T 999M2-F001S
Sold out
Is this your key?
- Part number 999M2-F001S. Match it to the number on the back of your key or inside the battery cover. Keys that look alike can have different numbers.
- Regular remote. A remote on your key ring, next to a separate key.
- 2 buttons: Lock/Unlock, Panic
Different key? We also have for your 1996 Nissan Altima:
This is the only key we list for the 1996 Nissan Altima.
- Usually far less than the dealer charges. The price is for the part; programming is done separately.
- Must be programmed to your car before it works. How depends on your vehicle; we suggest a local locksmith. Find a locksmith near you
- Battery CR2032, installed.
Add to your order
- One part number per listing. What you order is the manufacturer part number shown, not a look-alike with the same FCC ID.
- 30-day returns. Return policy
- Ships from our New Jersey warehouse with tracking. Shipping options
What happens after you order
- We check it and ship it. We pick your part by its part number and ship it from our New Jersey warehouse, with tracking. Added your VIN? We check the part against your car first and contact you if anything doesn’t match.
- Program it to your car. Not sure how your car does it? Call or email us with your VIN and we’ll tell you before you buy.
- Done. Still stuck? We help. Call 386-586-3650 or email help@remotesandkeys.com. If it won’t work with your car you have 30 days to return it.
Questions before you buy
How do I know this fits my car?
Look at the back of your current regular remote, or inside the battery cover. If the part number or the FCC ID printed there matches the one in the specifications on this page, it’s the right part.
Lost your key, or can’t read it? Type your VIN when you order and we check it before we ship. Your VIN is on your registration, insurance card, or the driver-side bottom of the windshield.
Do I need to program it, and how much does that cost?
Yes, a new key or remote has to be programmed to your car before it works. How depends on the year and trim: on some you do it yourself at the car with a short sequence of key turns and button presses (the steps come with it, no tool, no cost); on others a locksmith or dealer connects a programming tool. Send us your VIN and we’ll tell you which before you buy.
Will my old keys still work?
Bring every key you want to keep using when the new one is programmed. On many cars programming clears any key that isn’t there at the time.
What if it doesn’t work with my car?
Call us first. Most problems are solved on the phone. If the part doesn’t fit or won’t program to your car, you can return it within 30 days. See our return policy.
How fast will I get it?
In-stock orders ship from New Jersey with tracking. Shipping options and prices are shown at checkout before you pay.
Specifications
- Part number
- 999M2-F001S
- FCC ID
- KM0CA78720T
- Fits
- 1996 Nissan Altima
- Buttons
- 2 (Lock/Unlock, Panic)
- Frequency
- 315 MHz
- RF transmission
- Rolling Code (315 MHz ASK)
- Transponder chip
- None (RKE only)
- Battery
- CR2032
- Remote programming
- You can do it, no tools
The part number and FCC ID are printed on the back or inside your current remote. Match either one and it’s the right part.
About this part
Extended warranty is available on the checkout page.
Remote For Nissan:
The original remote is hard to come by in working condition so we only sell a replacement remote which looks different but works the same. It also has a longer warranty. If your Altima is from 1993-1996 or 1997 with production date before 3/17/97, and it is equipped with factory keyless entry, then you can order this remote.
Programming Procedure:
IMPORTANT: Have all the remotes you want to program for the system on hand (including any existing remotes) prior to beginning the procedure. Find the alarm control module under the driver side dash (often behind the kick panel on the left) which is brown or manila colored.)
1. Sit inside the vehicle with the hood, trunk and all the doors and windows closed.
2. Place the alarm console switch in ALARM OFF position.
3. Cycle the ignition key to ??N??(as far as you can go without cranking the engine) then back to ??FF??six times within 10 seconds, ending in the ??FF??position.
4. Move the alarm console switch from the ALARM OFF to the AUTO and back to the ALARM OFF position.
5. Press the LOCK/UNLOCK button on the remote ONE time.
6. To program additional remotes (AND re-program any existing remotes), repeat steps 4 and 5 for each additional remote.
7. To exit programming, open any door. Test transmitters for function.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Nissan Altima 1993, Nissan Altima 1994, Nissan Altima 1995, Nissan Altima 1996, Nissan Altima 1997
How to program it: Programming Procedure #501
- Sit inside the vehicle with the hood, trunk and all the doors and windows closed.
- Place the alarm console switch in ALARM OFF position.
- Cycle the ignition key to “ON” (as far as you can go without cranking the engine) then back to “OFF” six times within 10 seconds, ending in the “OFF” position.
- Move the alarm console switch from the ALARM OFF to the AUTO and back to the ALARM OFF position.
- Press the LOCK/UNLOCK button on the remote ONE time.
- To program additional remotes (AND reprogram any existing remotes), repeat steps 4 and 5 for each additional remote.
- To exit programming, open any door. Test transmitters for function.
What customers say
4.3 out of 5 from 1166 verified store reviews
-
Perfect service. As described!!
Tony Celentano · Verified buyer
2019 Mazda CX-5 Smart Key Fob -
works just as it should for my car
Brandon · Verified buyer
1995 Chevrolet Impala Genuine VATS Single Sided Key -
Found the fob my wife lost, now I have 3
Mike Loomis · Verified buyer
2024 Hyundai Ioniq 5 Smart Key Remote