Important Note:
Please note that aftermarket remote controls are not universally compatible. They are designed for specific aftermarket systems.
If you're here without checking your existing remote's FCC ID/Part Number or your system model under the dash, please contact us at:
Descripción
This used Ultra Start replacement remote features 4 buttons and a blue LED. The signal is transmitted at a frequency of 434MHz and can be programmed to work with two vehicles at a time.
Part Numbers: TXPT4P, TXPT4T (On The Circuit Board Between * and #)
FCC IDs: MKYTXPT4G, MXYTXPT4G, MXYTKPT4G, MKYTKPT4G
Programming Procedure:
1. Within 3 seconds turn the ignition ON, OFF, ON, OFF, ON.
2. Press and hold the program button - parking lights will come on (if lights don?? come on then turn key OFF for 5 seconds and repeat step 1.
3. Continue to hold the programming button. The parking lights will come on. Continue holding the programming button.
4. Press the LOCK button on each 1st car remote and the # button on each 2nd car remote. The parking lights will flash each time a remote is learned.
5. Release programming button and take out the key.
Note: Programming must be done quickly or you will be timed out. Do not pause more than one second between each remote. All remotes to be used must be programmed at the same programming session. All previously programmed remotes not reprogrammed now will be erased from stored codes. The system can learn up to four remotes including 2nd car remotes. You can program a remote as a 1st car remote in one vehicle and as a 2nd car remote in a second vehicle.