Descripción
Compatible with the following Aftermarket installed vehicle security systems:
- Excalibur 500
- Free-550
- Mercury-2 Models
- AL-500
- AL-500CF
- AL500 SPORT
- FREEDOM 550
- FREEDOM 550CF
- FREEDOM 550 SPORT
Battery Included: 27A 12V
FCC ID: L2M448
Part Number: 448-CF
Circuit Board ID: 448-09-B
Remote Control Programming:
Step 1: Turn the vehicle's ignition "On".
Step 2: Within 7 seconds, press the Valet/Override Switch 5 times. The alarm will emit a siren sound once to confirm entry into Remote Control Programming Mode.
Step 3: Within 10 seconds, press any button on each remote to be programmed. The siren will chirp to confirm each time a remote has been programmed.
If 10 seconds expire without any programming activity, or if the vehicle's ignition is turned "Off", the system will automatically exit Remote Control Programming Mode. The siren will emit 2 long chirps to confirm exit.
NOTE: Up to 4 remote controls can be programmed to operate the alarm. Whenever a remote control, new or existing, is programmed to the alarm, all existing codes are erased for security. So all remote controls that are intended to operate the alarm must be programmed at the same time.
Immobilizer Mode:
The immobilizer mode must be disarmed before entering remote control programming mode. (Refer to programmable feature #5)
- Turn "On" the ignition.
- Press and release the Valet/Override button (the siren will chirp twice).
- Press the valet/override button 5 times to enter remote control programming mode.
ATV:
The LED Status Indicator will show the number of programmed remote control transmitters for 90 seconds after the vehicle's ignition is turned on. As the instructions above show, programming extra transmitters to any vehicle security system is easy. The exclusive patented ATV feature protects against someone programming their own transmitter to operate your system.
How to Program Features:
Step 1:
Turn the vehicle's ignition "On", then "Off".
Step 2:
Within 7 seconds of turning the ignition "Off", press the Valet Switch 5 times. The siren will emit a sound once, confirming entry to Features Programming Mode.
Step 3:
Within 10 seconds of entering Features Programming Mode, press the Valet Switch the number of times equal to the number of the feature to be programmed. The siren will repeat the feature number with chirps to confirm.
Step 4:
After the system acknowledges the feature to be programmed:
- Press the "Lock" button on the remote to turn the feature "ON" (the siren will chirp once), or
- Press the "Unlock" button to turn the feature "OFF" (the siren will chirp twice).
Note: Once the feature to be programmed is selected, you can toggle the feature between its settings by pressing the "Lock" and "Unlock" buttons on the remote control.
To program more features, simply repeat Steps 3 and 4.
If 10 seconds expire without any programming activity, or if the vehicle's ignition is turned "On", the alarm will automatically exit Features Programming Mode. The siren will confirm the exit.