2003 Isuzu Rodeo Remote Head Key FCC ID: HYQ1512V 8-97318-854-0, 8-97318-944-0

SKU: 7601RF

Condition: Refurbished
Precio:
Precio de venta$174.95

Gastos de envío calculados en la caja

Stock:
Pronto en stock

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Descripción

Extended warranty is available on the checkout page.


FCC ID : NBG009066T
Part Number : 8-97318-854-0, 8-97318-944-0
Brand : Isuzu
Condition : Refurbished

Refurbished remotes and keys are factory original equipment components reconditioned with a brand new key, casing is either pre-owned or recased condition and may or may not include logo. They are fully tested and will function like their original equipment counterparts.


Programming Procedures :
To add new remotes without erasing existing remotes:
1. Open the driver鈥檚 door.
2. Insert the key into ignition.
3. Within 5 seconds, turn the ignition to ACC position and then to LOCK position
three times within three seconds.
4. Within 10 seconds close and open the door two times.
5. Turn the ignition to ACC and then to LOCK three times within three seconds.
6. Within 10 seconds close then open the door. The door locks will cycle twice to
confirm programming mode has been entered.
7. Within 20 seconds press the LOCK button on the remote you are programming.
The door locks will cycle to confirm.
8. Within 20 seconds press the UNLOCK button on the remote. The door locks
will cycle again to confirm.
9. Repeat from step 1 for each additional remote you wish to program.
10. Remove key from ignition.
To delete all remotes and add one new one:
1. Open the driver鈥檚 door.
2. Insert the key into ignition.
3. Within 5 seconds, turn the ignition to ACC position and then to LOCK position
three times within three seconds.
4. Within 10 seconds close and open the door two times.
5. Turn the ignition to ACC and then to LOCK five times within five seconds.
6. Within 10 seconds close then open the door. The door locks will cycle once to
confirm programming mode has been entered.
7. Within 20 seconds press the LOCK button on the remote you are programming.
The door locks will cycle to confirm.
8. Within 20 seconds press the UNLOCK button on the remote. The door locks will
cycle again to confirm.
9. Remove key from ignition.


Works on :
Isuzu Axiom (2002-2004), Isuzu Rodeo (2003-2004).

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)