Pursuit PRO9445FT Remote Programming
To program spare remote controls to your system follow the procedure below:
Notice: To ensure that the system to be ready for programming, it shouldn't be in valet mode. The dash mounted LED illuminates solidly when in valet mode. For anyone who is in valet mode flip the switch to the opposite position before starting.
1. Place your key in the ignition and turn it to the on position.
2. Flip the valet switch THREE times.
3. Push button #1 on the transmitter you wish to program for 3 seconds.
4. Flick the valet switch ONCE.
5. Press button #2 on the transmitter for Three seconds.
6. Take out key from ignition and then test the remote.