Pursuit PRO9349FT Remote Programming
To program spare transmitters to your system follow the directions below:
Be aware: In order for the system to be ready for programming, it shouldn't be in valet mode. The dash mounted LED lights up solidly when in valet mode. For anyone who is in valet mode flip the switch to the opposite position prior to starting.
1. Put your key in the ignition and turn it to the on position.
2. Flip the valet switch THREE times.
3. Press button #1 on the keyfob you wish to program for 3 seconds.
4. Flick the valet switch ONCE.
5. Press button #2 on the remote control for Three seconds.
6. Remove key from ignition and then test the fob.