Pursuit PRO9249R Remote Programming
To add extra transmitters to your system go through the instructions below:

Please note: In order for the system to be ready for programming, it should not be in valet mode. The dash mounted LED illuminates solidly when in valet mode. In case you are in valet mode flip the switch to the opposite position before you begin.

1. Place your key in the ignition and turn it to the on position.
2. Flip the valet switch THREE times.
3. Press button #1 on the keyfob you wish to add for 3 seconds.
4. Flick the valet switch ONCE.
5. Press button #2 on the transmitter for 3 seconds.
6. Remove key from ignition and then test the fob.