Pursuit PRO9249 Remote Programming
To add more remote controls to your system follow the instructions below:
Note: In order for the system to be ready for programming, it should not be in valet mode. The dash mounted LED lights up solidly when in valet mode. If you're in valet mode flip the switch to the opposite position before beginning.
1. Put your key in the ignition and turn it to the on position.
2. Flick the valet switch THREE times.
3. Push button #1 on the keyfob you wish to add for 3 seconds.
4. Flick the valet switch ONCE.
5. Press button #2 on the fob for Three seconds.
6. Take out key from ignition and then test the fob.