Pursuit PRO9244 Remote Programming
To add more fobs to your system go through the directions below:Please note: In order for the system to be ready for programming, it shouldn't be in valet mode. The dash mounted LED lights up solidly when in valet mode. Should you be in valet mode flip the switch to the opposite position before beginning.
1. Insert your key in the ignition and switch it to the on position.
2. Flick the valet switch THREE times.
3. Press button #1 on the remote you wish to program for Three seconds.
4. Flip the valet switch ONCE.
5. Push button #2 on the transmitter for Three seconds.
6. Remove key from ignition and then test the transmitter.