Silencer SLRF10 Immobilizer Remote H5OT25

SKU: Z7347A

Condition: Refurbished
Price:
Sale price$49.95

Shipping calculated at checkout

Stock:
Ships in 3-5 days

⚠️ Important: Verify Compatibility Before Purchase!

Important Note:

Please note that aftermarket remote controls are not universally compatible. They are designed for specific aftermarket systems.

Before purchasing, ensure your remote's FCC ID/Part Number or system model under the dash matches. If you're unsure, please contact us:

+1-386-586-3650

Description

This remote has been tested on keyless entry testers to ensure proper signal output. Programming instructions and tech support are included with the remote purchase. Battery is included with remotes. Works on: Silencer 4900, 4960, 4961, 4962, 4963, and 4964.

Programming Procedure:
ANTENNA: The long range antenna should be located somewhere on the windsheild of the vehicle. This antenna also contains two blue status LEDs as well as the Valet Button / Switch.

Transmitter Programming:
Enter:
1. Turn the ignition 'switch' to OFF/ON three times and stay in the ON position. Within fifteen seconds.
2. Push the Valet switch three times and gold it on the third push, when a long chirp is heard then release the valet switch.
Programming:
1. Press any button on transmitter 1 until the siren responds with a confirming chirp; the first transmitter is now programmed.
2. Press any button on the seconds transmitter until the siren responds with a confirming chirp; the seonds transmitter is now programmed.
3. Apply the same procedure to program the third and fourth transmitters.
Exit:
Turn the ignition to OFF position, or leave it for fifteen seconds. Three long chirps and three parking lights flashes will confirm the exit.
NOTE: If more than four transmitters are programmed, the system will only keep the last four.

Estimate shipping