Important Note:
Please note that aftermarket remote controls are not universally compatible. They are designed for specific aftermarket systems.
If you're here without checking your existing remote's FCC ID/Part Number or your system model under the dash, please contact us at:
Description
Extended warranty is available on the checkout page.
Remote with 6 Buttons Green LED with Solid Buttons and Sound
Brand: Astrostart
Condition: Used
FCC ID: J5F-TX2000
Part Numbers: 310-052-300-10
Four different remote controls can be programmed for a given vehicle. If a 5th remote is added the 1st is deleted. When the first code learned command is sent, all the old codes are cleared. Therefore, if you want to add a new remote, all the old ones must be programmed as well. A hood pin is required for the programming procedure associated with this remote.
Programming procedure:
1. Open hood.
2. Place key in ignition and turn to RUN position.
3. Apply the brake once.
4. You now have 10 seconds to turn the key from RUN to STOP position 3
times.
5. If this sequence is correctly carried out, the control module flashes
parking lights.
6. Press any button on the new remote control (except the panic button).
When access code of new remote is memorized, the control module will
respond with 1 flash of the parking lights.
7. Repeat the above procedures for each remote control that has to be
programmed, up to four remotes.
8. Apply the brake.
9. New remotes are ready and now added to the system.
Works on these aftermarket systems (Module Part Number: 392-1273-317):
Astrostart RSS-4204A, Astrostart RSS-2205A, Astrostart Series/Model 500, Astrostart Series/Model 1100, Astrostart Series/Model 2100, Astrostart Series/Model 4100, AstroStart 1105, AstroStart 1105U, AstroFlex 1105, AstroStart 1100, AstroFlex 1100, AstroFlex 2006, AstroStart 2006(A&B), AstroStart 2106XR, AstroStart 2106U, AstroStart 3106(A), AstroStart 3106(U), AstroFlex 3106M, AstroStart 4204-A.