Important Note:

Please note that aftermarket remote controls are not universally compatible. They are designed for specific aftermarket systems.

If you're here without checking your existing remote's FCC ID/Part Number or your system model under the dash, please contact us at:


Code Alarm CATX433 Keyless Starter Remote ELVATPA

SKU: Z1175A

Condition: Refurbished
Sale price$54.95

Shipping calculated at checkout

In stock


New Code Alarm CATX433 Keyless Starter Remote ELVATPA with programming instructions and battery included free.

Works on these Code Alarm systems: CA130, CA530, CA630, ELITE4100, ELITE4200, ELITE4300, ELITE4400, ELITE6100, ELITE7300, ELITE7400, ELITE7500, ELITE7600, PROF10, PROF12, PROF15, PROF17, PROF20, PROF25, PROF50, PROF55, PROF60 and PROF65.

Programming Procedure:

Open the driver?? door.

Turn the ignition key ON (turn key all the way forward without starting vehicle).

Press and Hold the programming/override button (located under dash). In approximately 20 seconds the system will start to cycle the door locks and siren (if equipped) 3 times to indicate the system has entered the transmitter learn mode (Do not release the programming/override button).

Press the #1 button on the un-programmed transmitter. The system will respond by cycling the door locks and the siren (if equipped) one time to indicate the transmitter has been learned.

All other transmitters (up to four) also need to be programmed at this time.

Programming is now complete, let go of the programming/override button and turn ignition off to exit learn mode.

Estimate shipping