Description
Extended warranty is available on the checkout page.
Remote For Ford:
This remote features 4 buttons: Unlock, Lock, Side Door Lock, Panic. This remote sends it's signals on a frequency of 315Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry.
FCC ID: M3N-A2C931423
Rotunda Part Number: 164-R8234
Ford Part Number: KT1T-15K601-CB
Strattec Part Number: 5938045
Condition: OEM New Ford
You will need key cutting, and in the case that you don鈥檛 have two working keys already, you will need an automotive locksmith. You can find a local licensed automotive locksmith using this website: autolocksmithfinder.com
Programming Procedure:
The procedure programs both the vehicle immobilizer keycode and the remote entry portion of the remote portion to your vehicle.
To program a new key, you require two programmed key and one unprogrammed key with your vehicle.
Make sure that you complete the procedure within 30 seconds. Stop and wait at least one minute before you start again if you miss a step.
NOTE: You can program a maximum of four keys to your vehicle. Read the entire procedure before you begin.
1. Close all the doors.
NOTE: Kepp the doors closed throughout the procedure.
2. Switch the ignition to off.
NOTE: Do not press the brake pedal or accelerator throughout the procedure.
3. Remove the key blade.
4. Remove the rubber mat from the cupholder.
5. Place the first programmed key in the backup position with the buttons facing upward and the unlock button facing the front of your vehicle.
6. Press the push button ignition switch.
7. Wait five seconds.
8. Press the push button ignition switch.
9. Remove the key.
10. Within 10 seconds, place the seconds programmed key in the backup position.
11. Press the push button ignition switch.
12. Wait five seconds.
13. Press the push button ignition switch.
14. Remove the key.
15. Within 10 seconds, place the unprogrammed key in the backup position.
16. Press the push button ignition switch.
Check that the remote control function operates with the new key
NOTE: Wait 10 seconds and epeat the proceure if the key functions do not operate.
Wait 20 seconds and repeat the procedure to program an additional key.
The following vehicle can use this remote when equipped with the factory keyless entry system:
Ford Transit Connect 2019-2023