2018 Ford F-150 Smart Key Fob PN: 164-R8185

SKU: 3054A-OEM

Condition: OEM New
Price:
Sale price$139.95 Regular price$250.00

Shipping calculated at checkout

Stock:
Ships in 3-5 days
 More payment options

Description


Note: This remote is requires an automotive locksmith for programming.


Remote For Ford:

Factory Smart Key Remote with FCC ID M3N-A2C93142600.

The Ford part number is 164-R8185.

The Strattec part number is 5933019.

This transmits it's signals on a frequency of remote has 902 MHz and it has 5 buttons, tested and guaranteed to work.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Ford F-Series Raptor (2018-2020).

Specifications

Part Numbers: 5933019, JL3V-15K601-AA, and 164-R8185

FCC ID: M3N-A2C93142600

Buttons: Lock, Unlock, Remote Start, Tailgate, and Panic

Frequency: 902 mhz

Remote Programming: Scan Tool

Led:

Battery (included) : CR2450

Programming Procedure #PF8

Programming Procedure:

You can program a maximum for four intelligent access keys to your vehicle. You must have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. See a qualified locksmith to have the spare key programmed if two previously programmed keys are not available. Make sure that your vehicle is off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you perform any steps out of sequence.

  • Read and understand the entire procedure before you begin:

1. Place the first programmed key in the backup slot (A) in the center console, then press the push button ignition switch. Insert the first previously programmed coded key into the ignition.
2. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Remove the intelligent access key. Switch the ignition off and remove the first coded key from the ignition.
4. Within 10 seconds, place a second programmed intelligent access key in the backup slot. Press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Remove the intelligent access key. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. Place the unprogrammed intelligent access key in the backup slot and press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. Programming is now complete. Verify the remote-control functions operate and your vehicle starts with the new intelligent access key. If programming was not successful, wait 10 seconds and repeat Steps 1 through 7.

Compatible with the following:

Ford

  • F-Series Raptor (2018-2020)

Estimate shipping