Description
Please contact an automotive locksmith when there aren't 2 existing working keys to initiate programming for the new remote.
Remote For Ford:
Factory keyless entry remote head key transmitter with FCC ID CWTWB1U793 or OUCD6000022.
The Ford part number is 164-R7976.
The Strattec part number is 5922964.
This is tested and guaranteed to work. This remote has 4 buttons and transmits it's signals on a frequency of 315mhz.
Programming Procedure:
- NOTE: This procedure works only if 2 or more programmed keys are available. If 2 programmed keys are not available, refer to Key Programming Using Diagnostic Equipment in your owner?? manual.
1. Insert the first programmed PATS key into the ignition and turn the key from the OFF position to the RUN position (maintain the key in the RUN position for approximately 3 seconds).
2. Turn the first key to the OFF position and remove the key from the ignition.
3. Within 10 seconds of turning the key to the OFF position, insert a second programmed PATS key into the ignition and turn the key from the OFF position to the RUN position (maintain the key in the RUN position for approximately 3 seconds).
4. Turn the second key to the OFF position and remove the key from the ignition.
5. Within 10 seconds of turning the key to the OFF position, insert the new unprogrammed PATS key into the ignition and turn the key from the OFF position to the RUN position (maintain the key in the RUN position for approximately 3 seconds).
6. If it is desired to program additional key(s) (up to a total of 8 keys can be programmed), repeat steps 1 - 5 for each additional key.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Ford Fiesta (2018-2019), Ford Fiesta (2015-2017).