Specifications
Part Numbers: 20979468GM, 13574863GM, 13504199GM, 13500221GM, and 5912545
FCC ID: OHT01060512
Buttons: Lock, Unlock, Panic, Trunk, and Remote Start
Frequency: 315 MHz
Remote Programming:
Transponder Programming:
Chip ID: PHILIPS ID 46 GM EXT
Led:
Description
FCC ID: OHT01060512
Part Numbers: 20979468, 13574863, 13504199, 13500221, 13504204, 13500226, 13501514, 13504259, 5912545, 5912556, 5912548.
Condition: Brand New Aftermarket (No Logo)
Brand: Avicero
Programming Procedure:
1. With a previously learned master key, turn ON the ignition, with the engine OFF.
2. Turn OFF the ignition and remove the key.
3. Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.
You will need key cutting and you can use this website to find a local licensed automotive locksmith: autolocksmithfinder
Notes:
- To initiate, this procedure requires that a learned master key be available.
- A total of 10 keys may be programmed to a single vehicle.
- This procedure adds keys only. The procedure does not erase previously learned keys.
- The keys to be learned must duplicate the mechanical cut of the current key.
- If more than one valet key is to be learned, immediately precede each valet key with a learned master key.
This flipkey remote works on the following vehicles if they are equipped with factory remote start:
Buick Allure (2010-2012), Buick Encore (2013-2020), Buick LaCrosse (2010-2016), Buick Regal (2011-2017),
Chevrolet Camaro (2010-2016), Chevrolet Cruze (2011-2015), Chevrolet Equinox (2010-2016), Chevrolet Impala (2015-2019), Chevrolet Sonic 4DR (2012-2018),
GMC Terrain (2010-2020).
Programming Procedure #Pgm3
- With a previously learned master key, turn ON the ignition, with the engine OFF.
- Turn OFF the ignition and remove the key.
- Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.
- To initiate, this procedure requires that a learned master key be available.
- A total of 10 keys may be programmed to a single vehicle.
- This procedure adds keys only. The procedure does not erase previously learned keys.
- The keys to be learned must duplicate the mechanical cut of the current key.
- If more than one valet key is to be learned, immediately precede each valet key with a learned master key.
Compatibility