2011 Chevrolet Corvette Smart Key Fob Driver 1 PN: 25926479

SKU: 7031RF

Condition: Refurbished
Price:
Sale price$99.95

Shipping calculated at checkout

Stock:
In stock

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Blake

Order received quickly.

B
Blake Yount
Two new GM OE C6 Fobs

I was very impressed with the group of people I dealt with. We had a little issue finding fobs that I originally ordered. Changed directions and ordered two key fobs from GM. USPS screwed up shipping and temporarily lost the package. They jumped right on it and asked for status. USPS said that they were lost and they were going to order me a new pair of fobs and send to me. USPS replied later that they found the package and I finally received them. Definitely not their fault on shipping mess. I would definitely do business with them again. Without a doubt. Thank you guys!

Before Purchasing

Important: Please make sure that your smart key fob looks identical and matches any of the part numbers or FCC IDs listed below. Contact Us with your VIN if you don't have an existing remote for comparison.

Specifications

Part Numbers: 25854929 and 25926479

FCC ID: M3N5WY7777A

Buttons:

Frequency: 315 Mhz

Remote Programming: By Transponder

Transponder Programming: Onboard if 1 working exist

Chip ID: PHILIPS ID 46

Battery: CR2032 (included)

Emergency Key: (included)

Programming Procedure #227

To match a new transmitter to your vehicle when you have a recognized transmitter (two recognized transmitters are required for Canadian owners):

  1. The vehicle must be off.
  2. Have the recognized and new, unrecognized transmitters on your person.
  3. Go to the rear of the vehicle and insert the vehicle key into the key cylinder located above the license plate. See Hatch on page 2-14 for more information on the key cylinder.
  4. Open the trunk.
  5. Turn the key five times within five seconds.
  6. The DIC will display READY FOR FOB #X, where X can be 2, 3 or 4.
  7. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing towards the passengers side.
  8. Once the transmitter is programmed, a beep will sound. The DIC will display READY FOR #X, where X can be 3 or 4, or MAXIMUM NUMBER OF FOBS LEARNED.
  9. Press the Acc. button (ignition switch).

The Canadian immobilizer standard requires Canadian owners to see their dealer/retailer for matching new transmitters when two recognized transmitters are not available. United States owners are permitted to match a new transmitter to their vehicle when a recognized transmitter is not available. The procedure will require three ten minutes cycles to complete the matching process.

  1. The vehicle must be off.
  2. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing towards the passenger side.
  3. Go to the rear of the vehicle and insert the vehicle key into the key cylinder located above the license plate. See Hatch on page 2-14 for more information on the key cylinder.
  4. Open the trunk.
  5. Turn the key five times within five seconds.
  6. The DIC message will display OFF-ACCESSORY TO LEARN.
  7. Press the Acc. button (ignition switch).
  8. The DIC will read WAIT 10 MINUTES and will count down to zero, one minute at a time.
  9. The DIC will display OFF-ACCESSORY TO LEARN again.
  10. Press the Acc. button (ignition switch).
  11. The DIC will read WAIT 10 MINUTES and will count down to zero, one minute at a time.
  12. The DIC will display OFF-ACCESSORY TO LEARN again.
  13. Press the Acc. button (ignition switch).
  14. The DIC will read WAIT 10 MINUTES and will count down to zero, one minute at a time.
  15. A beep will sound and the DIC will read READY FOR FOB #1. At this time, all previously known transmitters have been erased.
  16. Once the transmitter is recognized and programmed, a beep will sound and the DIC will display READY FOR FOB #2.

If you have additional transmitters to program, take transmitter 1 out of the transmitter pocket and place transmitter 2 in the pocket. This can be done repeatedly until up to four transmitters have be programmed. The DIC will then display MAXIMUM NUMBER OF FOBS LEARNED and will exit the programming mode.

When you are done programming transmitters, press the Acc. button (ignition switch).

Estimate shipping

Key fobs for 2011 Chevrolet Corvette can vary depending on the trim level, which may lead to compatibility issues. You can explore alternative solutions listed below, or don't hesitate to contact us with your VIN for further assistance.

Shipping

At Remtes and Keys, we strive to process and ship orders as quickly as possible to ensure timely delivery to our customers. For items that are in stock, we typically ship the next business day. However, for items that are currently out of stock and are being restocked, the shipping time may take up to a week. Please note that for items that are out of stock and do not have an estimated time of arrival (ETA), they are temporarily unavailable, and we are unable to provide a specific shipping date.

We understand the importance of timely and reliable shipping, and we work hard to ensure that our customers receive their orders as soon as possible. If you have any questions or concerns about the status of your order, please do not hesitate to contact our customer service team. We are always happy to assist you and provide you with updates on your order.

It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.

Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.

Product

No, the smart key remotes are not pre-programmed before shipping. In order for the smart key remote to function with your vehicle, your vehicle must be programmed to accept the remote.

If your vehicle supports an onboard programming procedure, you may be able to program the remote yourself by following the instructions provided on the product page and shipping package.

If your vehicle is not onboard programmable or if you need key cutting, we highly recommend seeking the assistance of a professional automotive locksmith rather than a dealership. Automotive locksmiths are trained and equipped to handle a wide range of vehicle key and remote programming needs, and they typically offer more competitive pricing than dealerships. The cost of their services is based on their local market and the expensive equipment used for key cutting and vehicle programming.

To program your new remote or key, an automotive locksmith will connect an expensive scan tool to your vehicle's computer and guide the vehicle through the programming process. We recommend using online resources such as www.autolocksmithfinder.com or your local yellow pages to locate a reputable automotive locksmith in your area.

We offer three types of smart key fobs: New OEM, Refurbished OEM, and New Aftermarket.

  • New OEM smart key remotes are 100% original equipment manufacturer (OEM) products that come in the original package. In some cases, they may be out of the original package if the package was not available in a sealed condition.
  • Refurbished smart key fobs are factory original equipment components reconditioned with a brand new emergency key, casing is either pre-owned or recased condition and may or may not include logo. They are fully tested and will function like their original equipment counterparts.
  • New Aftermarket remotes are premium quality Avicero brand new aftermarket products with no logos. These remotes are made to our high-quality standards and are an excellent option for customers who prefer a lower-cost alternative to OEM products.

At Remotes And Keys, we take pride in offering a wide range of automotive locksmith supplies and resources to help our customers keep their vehicles secure and functional. We stand behind the quality of our products and are committed to providing exceptional customer service.

Customer support

Send a message