Programming Procedure #DSF3076

The system has the ability to operate from up to eight (8) remote controls. Follow these instructions to add a remote control to your system.

  1. Turn vehicle ignition on.
  2. Press and hold the brake pedal.
  3. Press and hold the programming/override button under the instrument panel.
  4. After 15 seconds, the horn will sound three (3) times. This indicates that the unit has entered the remote control programming mode. The brake pedal can be released at this time.
  5. Release the programming/override button.
  6. Press the Remote Start button on the remote control you want to program
  7. The horn will sound once (1), indicating that the system has “learned” that remote control
  8. Repeat step five (5) for any additional remote controls you want programmed
  9. Turn the vehicle ignition off to exit the programming mode. Test all remote controls to ensure that they are working properly.