Note: 2 keys required. Programming remotes must be completed within 1 minute. 4 remotes can be programmed.
  1. Switch ignition to ON (as far as it goes without starting engine.)
  2. Step out of vehicle and close doors and trunk/hatch.
  3. Using second key in driver door, turn key to UNLOCK and hold for 10 seconds or until horn sounds 3 times.
  4. Press unlock/disarm on first remote (alarm horn will briefly sound once to confirm).
  5. Repeat step 4 for second, third, or fourth remotes - if any.
  6. Turn and hold the key in driver door to the unlock position (within 10 seconds the horn will sound 3 times).
  7. Step in vehicle and switch ignition to OFF.