Skip to content
- Flip the valet/overide switch (located under driver’s side dash) to the ON position.
- With the key in the ignition turn the ignition to ON then OFF.
- Flip the valet/override switch “OFF” then “ON, OFF, ON, OFF”. You will hear a siren chirp to confirm you are about to enter programming mode.
- Turn the ignition “ON, OFF, ON, OFF”. You will hear another chirp to confirm that you are now in programming mode.
- Push the green button on remote #1. Within 5 seconds push the green button on remote #2 (if any). You will hear chirps each time you program a remote.
- After 5 seconds programming mode ends by itself.
