Move the driver seat forward and locate the security system control box on the floor, under the seat.
Turn the ignition to ON.
Press and hold the green programming button on the side of the control unit with a pen or pencil. You will have to poke through a hole about the size of a pencil. When the security LED on the instrument panel turns on, release the programming button.
Step 3 and 4 must be done within 5 seconds of each other. Press and release the top button on the remote. Check that the LED light goes out, the siren chirps once, and the front marker lights flash to confirm the remote has been accepted.
Repeat steps 3 and 4 for any other remotes that need to be programmed.
Turn the ignition to OFF.
Fast shipping
Same day handling! Choose from multiple USPS and UPS shipping methods.
Satisfaction Guaranteed
30 day no hassle returns and exchanges.
Top-notch Support
Our agents can walk you through programming and troubleshooting.
Security and Privacy
We use ssl security to protect your data. We won't ever sell your data.