Programming Procedure #515
To add new remotes without erasing existing remotes:
To delete all remotes and add one new one:
- Open the driver’s door.
- Insert the key into ignition.
- Within 5 seconds, turn the ignition to ACC position and then to LOCK position three times within three seconds.
- Within 10 seconds close and open the door two times.
- Turn the ignition to ACC and then to LOCK three times within three seconds.
- Within 10 seconds close then open the door. The door locks will cycle twice to confirm programming mode has been entered.
- Within 20 seconds press the LOCK button on the remote you are programming. The door locks will cycle to confirm.
- Within 20 seconds press the UNLOCK button on the remote. The door locks will cycle again to confirm.
- Repeat from step 1 for each additional remote you wish to program.
- Remove key from ignition.
To delete all remotes and add one new one:
- Open the driver’s door.
- Insert the key into ignition.
- Within 5 seconds, turn the ignition to ACC position and then to LOCK position three times within three seconds.
- Within 10 seconds close and open the door two times.
- Turn the ignition to ACC and then to LOCK five times within five seconds.
- Within 10 seconds close then open the door. The door locks will cycle once to confirm programming mode has been entered.
- Within 20 seconds press the LOCK button on the remote you are programming. The door locks will cycle to confirm.
- Within 20 seconds press the UNLOCK button on the remote. The door locks will cycle again to confirm.
- Remove key from ignition.