Programming Procedure #513

The system accepts up to four remotes. If you program a fifth the first will be replaced. To clear a lost or stolen remote from the system’s memory then program the same remote four times.

  1. Turn the ignition switch to ON (II).
  2. Press and hold the Valet-Disarm button on the dashboard lower cover. (Continue to hold the button during this procedure, or programming will be cancelled.) The LED on the upper steering column cover flashes when the system is in programming mode.
  3. Press the top button on the remote. The parking lights flash to confirm programming.
  4. Press the top button on each remaining remote. Check that the parking lights flash for each remote.
  5. Release the Valet-Disarm button to exit programming mode.