Programming Procedure #503
IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.
- Open the trunk.
- Close and lock all doors with power door lock on the driver’s door.
- Insert key in ignition and remove it 6 times within 10 seconds. Make sure you withdraw the key completely each time. If you do it too fast the vehicle will not enter programming mode.
- Manually unlock and lock the driver door once with the manual knob.
- Within 5 seconds push the LOCK button on the remote.
- If there are any other remotes you wish to program including your old ones then repeat step 4 and 5 for each remote. You may program up to 4 remotes.
- Unlock driver’s door with manual lock knob, open driver’s door and close it.